Bosch 0 601 7D1 600 - Product Features; Technical Data

English | 27
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used(see "Operation", page34).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Unlocking lever for protective guard
(2)
Spindle lock button
(3)
On/Off switch
(GWS14-125/GWS14-125S/GWS17-125/
GWS17-125S/GWS17-125TS/
GWS17-125SINOX/GWS17-150S/
GWS17-125SB)
(4)
Dust filter (GWS14-125/ GWS14-125S)
a)
(4)
Dust filter
(GWS17-125/ GWS17-125S/ GWS17-125TS/
GWS17-125SINOX / GWS17-150S /
GWS17-125SB)
(5)
Speed preselection thumbwheel
(GWS14-125S / GWS17-125S / GWS17-125TS /
GWS17-125SINOX / GWS17-150S /
GWS17-125SB / GWS17-125PS /
GWS17-125PSB / GWS17-150PS)
(6)
On/off switch
(GWS17-125PS/GWS17-125PSB/
GWS17-150PS)
(7)
Unlocking lever for on/off switch
(GWS17-125PS/GWS17-125PSB/
GWS17-150PS)
(8)
Standard auxiliary handle (insulated gripping sur-
face)
a)
(9)
Vibration-damping auxiliary handle (insulated grip-
ping surface)
(10)
Extraction guard for grinding
a)
(11)
Protective guard for grinding
(12)
Protective guard for cutting
a)
(13)
Cover for cutting
(14)
Mounting flange with O-ring
(GWS14-125/GWS14-125S/GWS17-125/
GWS17-125 S/GWS17-125TS/
GWS17-125SINOX/GWS17-150S/
GWS17-125PS/GWS17-150PS)
(14)
Preassembled mounting flange with O-ring
(GWS17-125SB/GWS17-125PSB)
(15)
Carbide grinding head
a)
(16)
Grinding disc
a)
(17)
Disc brush (dia. 22.22 mm)
a)
(18)
Disc brush (M14)
a)
(19)
Cutting disc
a)
(20)
Diamond cutting disc
a)
(21)
Clamping nut
(22)
Quick-clamping nut
a)
(23)
Two-pin spanner for clamping nut
(24)
Handle (insulated gripping surface)
(25)
Grinding spindle
(26)
Hand guard
a)
(27)
Rubber sanding pad
a)
(28)
Abrasive disc
a)
(29)
Round nut
a)
(30)
Cup brush
a)
(31)
Conical brush
a)
(32)
Diamond annular cutter
a)
(33)
Open-ended spanner
a)
(34)
Extraction guard for cutting with cutting guides
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle Grinder GWS 14-125 GWS 14-125 S GWS 17-125 GWS 17-125 S
Article number
3601GD00.. 3601GD01.. 3601GD02.. 3601GD03..
Rated power input W 1400 1400 1700 1700
Power output W 830 830 1010 1010
Rated no-load speed
A)
min
-1
11,500 11,500 11,500 11,500
Speed adjustment range min
-1
– 2800–11,500 – 2800–11,500
Max. grinding disc diameter/rubber
sanding pad diameter
mm 125 125 125 125
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding
spindle
mm 21 21 21 21
Bosch Power Tools 1 609 92A 99S | (24.01.2024)