Bosch 0 601 7D1 600 - Page 30

30 | English
GWS 17-125 TS GWS 17-125 S INOX GWS 17-150 S GWS 17-125 SB
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
94
102
3
95
103
3
95
103
3
95
103
3
Vibration total values a
h
(triax vector sum) and uncertainty K determined according toENIEC62841-2-3:
Surface grinding and abrasive cutting:
a
h
K
m/s
2
m/s
2
5.5
1.5
5.4
1.5
8.0
1.5
4.6
1.5
Disc sanding:
a
h
K
m/s
2
m/s
2
3.5
1.5
2.7
1.5
3.5
A)
1.5
3.2
1.5
A)
Determined for a diameter of 125mm
GWS 17-125 PS GWS 17-150 PS GWS 17-125 PSB
3601GD13.. 3601GD16.. 3601GD17..
Noise emission values determined according toENIEC62841-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
94
102
3
94
102
3
94
102
3
Vibration total values a
h
(triax vector sum) and uncertainty K determined according toENIEC62841-2-3:
Surface grinding and abrasive cutting:
a
h
K
m/s
2
m/s
2
5.5
1.5
4.6
1.5
4.8
1.5
Disc sanding:
a
h
K
m/s
2
m/s
2
3.2
1.5
3.5
A)
1.5
3.2
1.5
A)
Determined for a diameter of 125mm
Grinding thin metal sheets or other materials that tend to easily vibrate with a large surface area can cause the noise emission
value to increase by up to 15dB. Suitable, heavy damping mats can reduce the increased noise emissions. Increased noise
emissions must be taken into consideration, both for the risk assessment of the noise output and for selecting suitable hearing
protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
1 609 92A 99S | (24.01.2024) Bosch Power Tools