EasyManua.ls Logo

Bosch 0 601 9K3 305 - Page 15

Bosch 0 601 9K3 305
119 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English | 15
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
cordless combi drill is also designed for impact drilling in
brick, masonry and stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(GSB 18V-45)
(5)
Gear selector switch
(6)
Belt clip
(7)
Rechargeable battery
a)
(8)
Battery release button
a)
(9)
Worklight (LED)
(10)
Rotational direction switch
(11)
On/off switch
(12)
Handle (insulated gripping surface)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless Drill/Driver GSR 18V-45 GSB 18V-45
Article number
3 601 JK3 2.. 3 601 JK3 3..
Rated voltage V= 18 18
No-load speed
A)
First gear min
-1
0–500 0–500
Second gear min
-1
0–1 900 0–1 900
Impact rate
A)
min
-1
0–27 000
Max. torque (soft)
A)
Nm 21 21
Max. torque (hard)
A)
Nm 45 45
Max. drilling diameter (1st/2nd gear)
Wood mm 35 35
Steel mm 10 10
Masonry mm 10
Chuck capacity mm 1.5–13 1.5–13
Max. screw diameter mm 10 10
Weight according to EPTA-Proced-
ure01:2014
B)
kg 1.3–2.3 1.3–2.4
Recommended ambient temperature during
charging
°C 0to+35 0to+35
Permitted ambient temperature during opera-
tion and during storage
°C –20to+50 –20to+50
Recommended rechargeable batteries GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A)
Measured at 20–25°C with rechargeable battery GBA 18V 2.0Ah.
B)
Measured withGBA 18V 1.5Ah andGBA 18V 12Ah.
Noise/Vibration Information
GSR 18V-45 GSB 18V-45
Noise emission values determined according toEN62841-2-1.
The noise level when working can exceed the volume stated.
Bosch Power Tools 1 609 92A 6GH | (20.12.2021)

Related product manuals