To Next PageTo Next Page
Need help?Do you have a question about the Bosch 1581AVS and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| Vibration Control | Yes |
| Stroke Length | 1-1/8 inch |
| Orbital Action | Yes |
Maintain a clean, well-lit work area and keep bystanders away. Avoid explosive atmospheres.
Use polarized plugs, avoid wet conditions, and protect cords from damage. Ensure correct voltage supply.
Stay alert, dress properly, secure hair/clothing, and use safety equipment like eye protection.
Secure workpieces, use the correct tool for the job, and maintain proper footing and balance.
Service must be performed by qualified personnel using identical replacement parts.
Disconnect tool before cleaning. Use compressed air and avoid harsh cleaning agents.
Handle tool by insulated surfaces, avoid accidental starts, keep hands clear, use sharp blades.
Learn the meaning of symbols used on your tool for better and safer operation.
Understand marks indicating listing and compliance with safety standards.
Identifies key parts of the jigsaw, including trigger, blade plunger, and footplate.
Lists maximum cutting capacities for various materials like wood, metal, and plastic.
Step-by-step instructions for installing and removing the jigsaw blade correctly.
How to control and lock the variable speed trigger for different cutting needs.
Using the dial to preset the trigger speed for consistent operation.
Factors influencing jigsaw cutting speed and stroke rate for optimal performance.
Adjusting the blade orbit selector for maximum cutting efficiency on different materials.
Types of blades suitable for orbital Setting O, including reverse-tooth and grit-edge blades.
How to tilt the footplate for angle cuts up to 45 degrees using the screw and scale.
Using the anti-splinter insert to minimize splintering on workpiece surfaces.
Repositioning the footplate for perpendicular cuts near vertical surfaces.
Using the three-position chip blower to clear the cutting line of debris.
General advice for securing workpieces, cutting techniques, and blade selection.
Choosing the right blade for cutting curves, finish, speed, and material type.
Guidance on lubricating gears and checking/replacing carbon brushes and bearings.
Safe methods for cleaning the tool, including warnings about cleaning agents.
Guidance on selecting the correct extension cord size based on tool amperage and cord length.
List of standard equipment and optional accessories available for the jigsaw.
One-year warranty for portable and benchtop tools, excluding accessories. Limitations apply.
