-3-
63+ 76>,9 ;663 )@ 05:<3(;,+ .907705.
:<9-(*,:),*(<:,;/,*<;;,94(@*65;(*;
0;:6>5*69+ Cutting a ”live” wire may make
exposed metal parts of the power tool ”live”
and shock the operator.
":, *3(47: 69 (56;/,9 79(*;0*(3 >(@ ;6
:,*<9, (5+ :<7769; ;/, >69270,*, ;6 (
:;()3, 73(;-694 Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
-*<;;05.05;6,?0:;05.>(33:696;/,9)305+
(9,(:>/,9,,3,*;90*(3>0905.4(@,?0:;0:
<5(=60+()3, +0:*655,*; (33 -<:,: 69
*09*<0;)9,(2,9:-,,+05.;/0:>692:0;,
3>(@: 4(2, :<9, ;/, >692 :<9-(*, 0:
-9,,-964 5(03:(5+6;/,9 -69,0.56)1,*;:
Cutting into a nail can cause the bit and the
tool to jump and damage the bit.
,=,9/63+;/,>69270,*,0565,/(5+(5+
;/, ;663 05 ;/, 6;/,9 /(5+ >/,5 05 <:,
,=,9 73(*, /(5+: 5,(9 69 ),36> *<;;05.
:<9-(*, Clamping the material and guiding
the tool with both hands is safer.
,=,9 3(@ >69270,*, 65 ;67 6- /(9+
:<9-(*,: 302, *65*9,;, :;65, ,;*
Protruding cutting bit may cause tool to jump.
3>(@: >,(9 :(-,;@ .6..3,: (5+ +<:;
4(:2 ":, 653@ 05 >,33 =,5;03(;,+ (9,(
Using personal safety devices and working in
safe environment reduces risk of injury.
-;,9 */(5.05. ;/, )0;: 69 4(205. (5@
(+1<:;4,5;:4(2,:<9,;/,*633,;5<;(5+
(5@ 6;/,9 (+1<:;4,5; +,=0*,: (9,
:,*<9,3@ ;0./;,5,+ Loose adjustment
device can unexpectedly shift, causing loss
of control, loose rotating components will be
violently thrown.
,=,9 :;(9; ;/, ;663 >/,5 ;/, )0; 0:
,5.(.,+ 05 ;/, 4(;,90(3 The bit cutting
edge may grab the material causing loss of
control of the cutter.
3>(@: /63+ ;/, ;663 >0;/ ;>6 /(5+:
+<905. :;(9;<7. The reaction torque of the
motor can cause the tool to twist.
$/,5 96<;05. 69 *<;;05. ;/, +09,*;065 6-
-,,+ >0;/ ;/, )0;F: *<;;05. ,+., 05;6 ;/,
4(;,90(3 0: =,9@ 04769;(5; 3>(@: -,,+
;/, )0; 05;6 ;/, 4(;,90(3 05 ;/, :(4,
+09,*;065 (: ;/, *<;;05. ,+., 0: ,?0;05.
-964 ;/, 4(;,90(3 >/0*/ 0: ;/, :(4,
+09,*;065(:;/,*/07:(9,;/96>5 !
inside and outside cuts will require different
feed direction, refer to section on feeding the
router. Feeding the tool in the wrong
direction, causes the cutting edge of the bit
to climb out of the work and pull the tool in
the direction of this feed.
,=,9 <:, +<33 69 +(4(.,+ )0;: /(97
)0;:4<:;),/(5+3,+>0;/*(9, Damaged
bits can snap during use. Dull bits require
more force to push the tool, possibly causing
the bit to break.
(-,;@<3,:-696<;,9:
0:*655,*;;/,73<.-964;/,76>,9:6<9*,
(5+69;/,)(;;,9@7(*2-964;/,76>,9;663
),-69,4(205.(5@ (+1<:;4,5;: */(5.05.
(**,::690,:69 :;6905.76>,9;663: Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
;69, 0+3, 76>,9 ;663: 6<; 6-;/,9,(*/ 6-
*/03+9,5(5++656;(336>7,9:65:<5-(4030(9
>0;/;/,76>,9;66369;/,:,05:;9<*;065:;6
67,9(;, ;/, 76>,9 ;663 Power tools are
dangerous in the hands of untrained users.
(05;(0576>,9;663:/,*2-6940:(30.54,5;
69 )05+05. 6- 46=05. 7(9;: )9,(2(., 6-
7(9;: (5+ (5@ 6;/,9 *65+0;065 ;/(; 4(@
(--,*;;/,76>,9;663F:67,9(;065-+(4(.,+
/(=, ;/, 76>,9 ;663 9,7(09,+ ),-69, <:,
Many accidents are caused by poorly
maintained power tools.
,,7*<;;05.;663::/(97(5+*3,(5Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
":, ;/, 76>,9 ;663 (**,::690,: (5+;663
)0;:,;*05(**69+(5*,>0;/;/,:,05:;9<*;065:
;(205.05;6(**6<5;;/,>69205.*65+0;065:
(5+ ;/, >692 ;6 ), 7,9-694,+Use of the
power tool for operations different from those
intended could result in a hazardous situation.
,9=0*,
(=,@6<976>,9;663:,9=0*,+)@(8<(30-0,+
9,7(09 7,9:65 <:05. 653@ 0+,5;0*(3
9,73(*,4,5;7(9;: This will ensure that the
safety of the power tool is maintained.
BM 2610933969 09-12_BM 2610933969 09-12.qxp 9/20/12 9:19 AM Page 3
To Next Page
Loading...
Need help?
General
