Bosch 3 611 B64 110 User Manual

INSTANDSETZUNGSHINWEISE
REPAIR INSTRUCTIONS
INSTRUCTIONS DE REPARATION
INSTRUCCIONES DE REPARACION
Änderungen vorbehalten. Unsere Erzeugnisse werden stets
dem neuesten technischen Stand angepaßt. Deshalb behalten
wir uns Änderungen vor.
Bohrhammer
Rotary Hammer
Marteau perforateur
Martillo perforador
Typ 3 611 B64 000 = GBH5-DCE
010
110
Beachten: Instandsetzung, Änderung und Prüfung von Elektrowerkzeugen sind
fachgerecht durchzuführen. Die Sicherheitsvorschriften nach DIN VDE, CEE,AFNOR und
weitere in den einzelnen Ländern gültigen Vorschriften sind einzuhalten.
3 611 B64 000 - D01 (2009-01)
Robert Bosch GmbH
.
PowerTool Devision
.
PT/ASA3
.
70745 Leinfelden-Echterdingen

Bosch 3 611 B64 110 Specifications

General

Brand	Bosch
Model	3 611 B64 110
Category	Rotary Hammer
Language	English

Summary

Initial Disassembly Steps

1. Entrance Check

Perform initial power supply check and observe safety regulations.

2. General Disassembly Procedure

Disassemble using explosion/cut-away drawings and repair instructions.

3. Initial Disassembly Sequence

Steps 3, 3.1 (Loctite 222), and 3.2 for initial disassembly.

Continued Disassembly Operations

3.3 - 3.5 Disassembly Steps

Further disassembly steps 3.3, 3.4, and 3.5.

6.3 - 6.10 Disassembly Steps

Steps 6.3 to 6.10 covering the remainder of the disassembly process.

4. - 5.2 Disassembly Sequence

Steps 4, 4.1, 4.2, 5, 5.1, and 5.2 for continued disassembly.

Further Disassembly Steps

5.3 - 6.2 Disassembly Sequence

Steps 5.3 through 6.2 detailing further disassembly procedures.

Disassembly Steps 7 & 8

7. & 8.1-8.6 Disassembly Sequence

Disassembly steps 7, 8, and sub-steps 8.1 to 8.6.

Disassembly Steps 9 & 10

9. & 10.1-10.3 Disassembly

Final Disassembly Steps

10.4 - 12.2 Disassembly Sequence

Assembly Process Start

21. Cleaning Oil Residue

21.1, 21.2, 22.1, 22.2 Assembly Steps

Assembly Steps 23

23. & 23.1-23.7 Assembly

Assembly Steps 24

24. & 24.1-24.8 Assembly Procedure

Assembly Steps 25 & 26

25. & 25.1-25.5 Assembly

26. & 26.1-26.2 Assembly

Assembly Steps 27 (Part 1)

27. & 27.1-27.3 Assembly

Assembly Steps 27 & 28 (Part 1)

27.4 - 28.2 Assembly Steps

Assembly Steps 28 (Part 2)

28.3 - 28.10 Assembly

Assembly Steps 30

30. & 30.1-30.5 Assembly

Final Tests and Checks

31. High Voltage Test

32. Performance Tests

Lubrication Guide

Lubrication Specifications