Bosch 3 611 C35 100 User Manual

INSTANDSETZUNGSHINWEISE
REPAIR INSTRUCTIONS
INSTRUCTIONS DE REPARATION
INSTRUCCIONES DE REPARACION
Änderungen vorbehalten. Unsere Erzeugnisse werden stets
dem neuesten technischen Stand angepaßt. Deshalb behalten
wir uns Änderungen vor.
Modifications. Our products are constantly modified to meet
new technical standards. We therefore reserve the right to
alter data and specifications without prior notice.
Modifications. Nos produits sont continuellement adaptés aux der-
nières nouveatés techniques et les dates sont données sous réserve
de changement.
Modificationes. Nuestros fabricados van siendo adaptos constante-
mente a las últimas conquistas téchnicas. Por ello, tenemos que reser-
varnos el derecho de introducir modificationes en los datos téchnicos.
Bohrhammer
Rotary Hammer
Marteau perforateur
Martillo perforador
Typ 3 611 C35 100 = GSH 16-30
Attention: Repair, modification, and testing of power tools must be carried out in
accordance with the generally recognised principles of engineering practise. Safety
regulations according to DIN VDE, CEE, AFNOR and further regulations applicable
in individual countries must be observed.
Beachten: Instandsetzung, Änderung und Prüfung von Elektrowerkzeugen sind
fachgerecht durchzuführen. Die Sicherheitsvorschriften nach DIN VDE, CEE,AFNOR
und weitere in den einzelnen Ländern gültigen Vorschriften sind einzuhalten.
Obsérvese: La reparación, modificación y verificación de herramientas electricas
mano debe efectuarse en forma técnicamente correcta. Respetar las normas de
seguridad segun DIN VDE, CEE, AFNOR, asi como otras disposiciones vigentes en
los distinos paises.
Attention: La remise en état, la modification et le controle des outils électriques
doivent etre ef- fectués par des personnes qualifiées. Il convient de respecter les
prescriptions de sécurite selon DIN VDE, CEE, AFNOR, ainsi que les
réglementations en vigueur dans le pays concerné.
3 611 C35 100 - D01 (2008-04)
Robert Bosch GmbH
.
PowerTool Devision
.
PT/ASA3-EU
.
70745 Leinfelden-Echterdingen

Bosch 3 611 C35 100 Specifications

General

Impact Energy	3.2 J
Drilling Capacity in Steel	13 mm
Drilling Capacity in Wood	30 mm
Tool holder	SDS plus
Optimum range of applications in concrete with hammer drill bits	8-16 mm

Summary

Bosch GSH 16-30 Rotary Hammer Repair Manual

Product Identification and General Notes

Identifies the GSH 16-30 rotary hammer and outlines safety, compliance, and modification policies.

Disassembly Preparation and Initial Steps

Covers preliminary checks, safety regulations, and the start of the disassembly process.

Housing and Body Disassembly

Detailed steps for disassembling the rotary hammer's outer housing and main body components.

Component Removal and Lubrication During Disassembly

Details on removing specific components and applying lubrication during the disassembly process.

Advanced Disassembly and Internal Parts

Procedures for disassembling internal components and securing parts.

Gearbox and Mechanism Disassembly

Instructions for disassembling the gearbox and internal mechanisms of the hammer.

General Assembly Guidelines and Tools

Provides guidelines for cleaning, using original spares, and preparing for assembly.

Specific Assembly Steps

Details on assembling specific parts using mounting pins and tools.

Electrical and Mechanical Assembly

Instructions for installing electrical wiring and mechanical parts, checking positions.

Motor and Gear Assembly

Steps for assembling the motor and gears, including oil immersion and grease application.

Housing and Final Component Assembly

Instructions for assembling housing and final components, including Loctite application.

Final Testing and Lubrication Summary

Covers final testing, operational checks, and provides a summary of lubrication requirements.