en-us Getting Started
12
Menu overview
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
settings.
Use the function keys #, + and
3 to change the settings. See
instructions ~ "1 Operating the
Dishwasher" on page 33
--------
Setting Factory setting Description
š Intensive drying
š:‹‹ - š:‹‚
š:‹‹ / Off Improved drying for glasses and plasticware.
§ Rinse aid
§:‹‹ - §:‹‡
§:‹† Amount of rinse aid affects drying.
› Cycle completion signal
›:‹‹ - ›:‹„
›:‹ƒ Signal sounds when wash cycle is complete.
˜ Auto power off
˜:‹‹ - ˜:‹ƒ
˜:‹‹ Dishwasher switches off automatically after wash
cycle is complete.
‚ Infolight®
‚:‹‹ - ‚:‹‚
‚:‹‚ / On Light is projected to signal an active wash cycle.
© Auto door open
©:‹‹ - ©:‹‚
©:‹ ‹ / Off Door automatically opens at the end of every cycle
except rinse.
To Next Page
Loading...
