In the new Control Center version 3.35 the ICMP is not
required anymore, therefore in this CC version you can set ICMP to Off in
the local UI menu ‘Network-TCP/IP’
• Low bandwidth support by selecting 256/512kbps bandwidth throttle (iFrame only mode
when selecting bandwidth of 256 or 512kbps in local UI)
• PAL or NTSC video format detection is improved (user will be clearly notified when
video format of DVR don’t match with video format of connected cameras).
• Improve PTZ handling in full screen (you can select Menu, Search, Export or Exit when
PTZ control is active)
• Avoid invalid log-on when user ID is used special characters like /:@ (In this firmware
these characters are grayed out and cannot be selected)
• Give warning/possible to cancel before delete video after video format (NTSC/PAL)
change
This release includes the following bug fixes were below issues are solved:
• It is possible to use AUX on/off function in Control Center version 3.35
• Correct AM/PM setting using export via web when DVR is set in 24h mode
• Dome never stop moving if using PTZ control and drag mouse point
Note 1
Issue: Web access log-on as “Normal user” that has rights for playback. Still the playback icon
is grayed out and cannot be pressed.
Solution: You can select additional rights for Play, Search, Export and Alarm acknowledge for a
“Normal user”. However to give additional ‘Play’ rights you also have to give additional ‘Search’
rights. You cannot have ‘Play’ rights without also having ‘Search’ rights activated.
Note 2
Issue: Uploading DVR 430/451 firmware via webpage using IE, can cause unexpected error
message "DVR update file contains errors" as result of IE security settings.
Solution: Enable "Include local directory path when uploading files to a server".
In IE9 this setting can be found in "tools", "Internet options", "Security", "Custom level",
"Miscellaneous", "Include local directory path when uploading files to a server". Enable this
setting to make uploading DVR430/451 firmware possible.
Note 3
The CC only shows maximum one event per second. So if more events are generated within
one second only the last event is shown. On the local unit always all events are shown.
To Next Page
Loading...
Need help?
General
