6 720 644 942
10
Installation instructions
Mounting heater.
The heater must be mounted on a wall using
appropriate anchoring materials. If wall is a stud wall
sheathed with plasterboard, it is recommended that
support board(s), either 1x4’s or 1/2" (minimum)
plywood first be attached across a pair of studs and
then the heater should be attached to the support
boards. See Fig. 11.
B Install the two included L shaped hooks to wall studs
or support board 13 ¼” apart (See Fig. 11).
B Hang heater on two L shaped hooks (See Fig. 12).
Fig. 10 Remove front cover
Fig. 11 Support board
Fig. 12 Secure heater to wall
Warning:
B Do not install this appliance on a
carpeted wall.
To Next Page
Loading...
