To Next PageTo Next Page
Need help?Do you have a question about the Bosch Tronic 5000 Series and is the answer not in the manual?
General| Power Supply | Electric |
|---|---|
| Power | 18 kW |
| Application | Residential |
| Installation | Wall-mounted |
| Water Pressure | 150 psi |
| Temperature Range | 140°F |
Explains warning symbols like DANGER, WARNING, CAUTION, NOTICE.
Covers general usage, safety notices, regulations, intended use, and altitude limits.
States product compliance with EU legislation and European/national requirements.
Outlines regulations and guidelines for potable water use and installation environment.
Lists included accessories like shut-off valve, nipple, screws, wall plugs, washers.
Refers to consulting the appliance catalogue for available accessories.
Provides physical dimensions of the appliance in mm with diagrams.
Illustrates the internal components and their numbering.
Details requirements for safe transportation and storage of the appliance.
Describes the appliance's control panel and its indicators.
Provides crucial warnings and advice before the initial setup and use.
Explains the procedure for turning the appliance on and off, including LED status.
Details how to set and control the hot water temperature, including modes and winter operation.
Outlines steps to follow after an electrical power interruption.
Details the procedure after a water supply interruption.
Instructs on how to clean the appliance safely.
Explains how to reset internal counters for consumption monitoring.
Mentions Wi-Fi connectivity support and refers to the device catalogue.
Advises on what information to provide when contacting customer service.
Emphasizes that installation must be done by qualified experts.
Covers site selection criteria, protection zones, and environmental considerations.
Details steps for unpacking and removing the appliance's front cover.
Provides instructions and warnings for connecting the water supply.
Explains how to securely mount the appliance to the wall using provided accessories.
Guides on electrical connection procedures and safety precautions.
Details the process of assembling the hydraulic block.
Provides instructions for installing the optional Aquastop system.
Explains how to remove air from the hydraulic system after installation.
Guides on setting appliance parameters and configuring its functions.
Details how to set the appliance's power output using jumpers.
Explains how to set the maximum temperature using jumpers.
Describes how to configure the appliance for use with a priority relay.
Details the different ways to make the electrical mains connection.
Explains how to connect the operating panel cable and install the appliance cover.
Details the initial commissioning process, emphasizing expert involvement and connection checks.
Explains how to remove or replace the flow limiter, often for troubleshooting.
Presents detailed technical characteristics like output, voltage, cable size, flow rates, and pressure.
Details energy consumption figures and efficiency ratings according to EU regulations.
