Need help?Do you have a question about the Bosch Tronic 2000T and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Wattage | 1440 W |
| Type | Electric Storage Water Heater |
| Installation | Wall-mounted |
| Temperature Range | 65°F to 145°F (29°C to 63°C) |
| Energy Factor | 0.95 |
| Water Pressure | 150 psi |
Defines warning symbols and keywords like NOTICE, CAUTION, WARNING, DANGER for risk identification.
Covers installation safety, isolation from power supply, and general maintenance safety precautions.
Installer's responsibility to inform users about operation, maintenance, and prohibition of modifications.
Safety requirements for children and users with reduced capabilities, as per EN 60335-1.
Describes the appliance's purpose for heating and storing DHW and correct usage conditions.
Details the tank material, pressure resistance, exterior, insulation, and anode.
Explains the glass enamel lining and magnesium anode for tank protection against corrosion.
Lists included accessories like hooks, sleeves, safety valve, and galvanic insulator.
Lists technical specifications including capacity, weight, electrical details, and protection class.
Provides physical dimensions (A, B, C, D) for different appliance models in mm.
Illustrates and lists the components of the appliance, such as tank, heating element, and thermostat.
Shows the electrical circuit diagram for the appliance.
States the need to fulfill country-specific regulations for electric appliance installation.
Covers guidelines for handling, storing, and disposing of the appliance according to regulations.
Provides critical safety warnings before installation, including handling and electrical connections.
Advises on choosing a suitable wall and location, avoiding heat sources and corrosive environments.
Details how to connect water inlets and outlets, emphasizing corrosion prevention and filtration.
Instructs on installing a safety valve and warns against obstructing its outlet.
Emphasizes safety precautions for electrical connections, including cutting power first.
Explains how to operate the power switch to turn the appliance on and off.
Guides on adjusting the water temperature using the selector and explains the heating cycle.
Describes the function of the anti-frost mode which activates when the tank temperature reaches 5°C.
Provides instructions on how to safely drain the appliance, warning about burn risks.
States Bosch's commitment to environmental strategy, product quality, and regulations.
Mentions participation in recycling programs and environmentally friendly packaging.
Guides on proper disposal of old appliances according to the EU directive.
Outlines user responsibilities for cleaning, safety valve checks, and periodic maintenance.
Advises on cleaning the exterior using a soft cloth and avoiding harsh detergents.
Explains how to verify the safety valve's function during heating and not to obstruct its outlet.
Recommends manual activation of the safety valve monthly and warns about purging water.
States that maintenance and repair are client's responsibility, requiring authorized technicians.
Lists essential pre-maintenance steps like turning off power and water, and using genuine parts.
Describes how to check the working order of all appliance elements and warns against using decalcifying agents.
Explains the function of the anti-corrosion anode and the consequences of operating without one.
Details the process for periodic cleaning, including safety warnings about hot water and operation times.
Provides instructions for appliances that have been inactive for over three months.
Explains the automatic safety thermostat and the procedure for its manual reset by authorized technicians.
Discusses how water characteristics can lead to scale buildup affecting performance and lifespan.
Lists steps to take after maintenance, such as checking connections and turning on the appliance.
Provides a troubleshooting table for common issues like no hot water, insufficient capacity, and noise.
To Next Page