To Next PageTo Next Page
Need help?Do you have a question about the Bosch Tronic 1000T and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Mounting | Wall-mounted |
| Protection Class | IP25 |
| Type | Electric water heater |
| Power | 1.5 to 3 kW |
| Power Supply | Single-phase |
| Power Consumption | 1.5 to 3 kW |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Flow Rate | Varies by model |
Explains warning symbols and keywords used in the manual for risk identification.
Provides critical safety guidelines for installation, operation, and customer awareness.
Lists the items included in the standard delivery of the electric storage water heater.
Provides a general overview of the electric storage water heater components and their functions.
Details the main features, materials, and operational aspects of the water heater.
Discusses water quality requirements, anode maintenance, and handling corrosive water conditions.
Explains how to switch off the appliance and discusses tariff options for water heating.
Covers nominal delivery, capacity, element rating, and water connection details.
Outlines power supply voltage, thermostat temperature range, and factory settings.
Covers nominal delivery, capacity, element rating, and water connection details for NZ.
Outlines power supply voltage, thermostat temperature range, and factory settings for NZ.
Provides dimensional data for side connections of various appliance models in mm.
Table detailing specific dimensions (A-E) for different appliance models.
Table detailing specific dimensions (A-D) for top connections of appliance models.
Illustrates the electrical circuit connections for the water heater.
Provides recommendations for storing and transporting the unit in its original packaging.
Highlights important warnings regarding handling, warranty, and packaging removal during installation.
Specifies ideal locations, clearances, and foundation requirements for installation.
Details cold and hot water connection types, fittings, and required plumbing components.
Information on installing a pressure limiting valve when supply pressure exceeds specifications.
Details requirements for fitting an ECV based on water quality and local regulations.
Recommends installing a temperature limiting device to prevent scalding.
Instructions for connecting the Pressure and Temperature Relief (PTR) valve, including warnings.
Specifies connection to a single phase 240V 50Hz supply and compliance with wiring rules.
Emphasizes isolating power before work, checking connections, and ensuring proper circuit protection.
Details how to access the terminal block cover for electrical connection.
Details regulations for fixing storage tanks with seismic strapping as per NZS4603 or NZS4607.
Ensures the cylinder is filled with water and checks connections before initial operation.
Explains how to switch the appliance on and off using isolation switches and notes on frost protection.
Recommends regular checks for faults, cleanliness, leaks, and connection tightness.
Provides troubleshooting steps for common issues like lack of hot water or high usage.
Addresses continuous discharge from ECV/PTR valves and potential causes like high pressure.
Provides Bosch service contact numbers and requires model/date information for support.
Recommends periodic inspections of valves, thermostat, elements, and wiring by qualified personnel.
Details the procedure and frequency for checking the PTR valve's operation.
Advises on isolating power/water and draining the unit for extended periods to prevent damage.
Describes the process for draining, flushing, and refilling the water heater, requiring an authorised person.
Details acceptable water quality parameters, including TDS, pH, and hardness, for optimal performance.
Explains the effects of corrosive water and scaling, and required components like ECV or special elements.
Outlines Bosch's commitment to environmental protection, compliance with laws, and use of eco-friendly technologies.
Describes participation in recycling systems and the eco-friendly nature of packaging materials.
Explains Bosch's warranty policy, coverage, and conditions for product repair or replacement.
Details the warranty duration for domestic and commercial use, and what is covered ('Parts & Labour' vs 'Parts only').
Lists conditions for warranty validity, including installation, serial numbers, and disassembly.
Outlines situations where the warranty does not apply, such as improper use, accidental damage, or unauthorized repairs.
Step-by-step guide on how to submit a warranty claim, including required information and contact methods.
Emphasizes the importance of promptly submitting warranty claims before the warranty period expires.
Highlights Bosch's commitment to product safety and liability obligations.
Explains how personal information is used for warranty claims and customer support, and privacy protection measures.
