en Cleaning and maintenance
50
4. Pull the heat exchanger cover out by
its grip.
5. Use a soft brush to clean the heat
exchanger cover.
Note: Make sure that no dirt or
debris is left on the seal.
6. Pull the insert out horizontally.
7. Rinse the insert under running water
and dry it off.
8. Clean the opening in the appliance
with a soft, damp cloth.
Notes
– Be careful not to damage the
heat exchanger, as it is exposed.
– Thanks to the appliance's self-
cleaning function, you do not
need to clean the heat
exchanger.
9. Slide the insert in horizontally as far
as it will go.
10.Slide the heat exchanger cover in by
its grip.
Note: You can only slide the heat
exchanger cover in if the insert is in
the appliance.
To Next Page
Loading...
