Cleaning and maintenance en
49
3. Remove the filter.
4. Clean the filter under warm, running
water or in the dishwasher.
5. Push the filter in until you feel it lock
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
6. Push the condensation container in
until you feel it lock into place.
Cleaning the base unit
You can clean the appliance's base unit
if it has fluff in it, for example.
Note: Allow the appliance to cool down
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
1. To open the maintenance flap, take
hold of it at the top at both sides and
pull it down.
2. Clean the maintenance flap with a
soft, damp cloth.
3. Unlock the levers on the heat
exchanger cover.
To Next Page
Loading...
