To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSR 9,6-2 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GSR 9, 6-2 |
| Category | Power Screwdriver |
| Language | English |
Keep workspace clean, well-lit, and free of hazards.
Ensure proper electrical connections, avoid water, and use grounded outlets.
Stay alert, use PPE, prevent unintentional starts, and dress appropriately.
Use correct tools, avoid forcing, maintain, and store tools properly.
Use specified chargers and batteries; handle with care to avoid injury and fire.
Ensure power tools are serviced by qualified personnel with identical parts.
Detect hidden utility lines to prevent electric shock or explosion hazards.
Be prepared for kickback if tool jams; switch off immediately.
Grip insulated surfaces when tool might contact hidden wiring to prevent electric shock.
Maintain a firm grip as high reaction torque can occur during operation.
Clamp workpiece securely for better control and safety.
Keep workplace clean; dust from light alloys can burn or explode.
Wait for the tool to stop completely before setting it down to avoid jams.
Ensure switch is off before inserting battery to prevent accidental starts.
Do not open batteries to prevent short-circuiting and explosion risks.
Tool is for driving screws and drilling wood, metal, ceramic, and plastic.
Lists and describes the numbered parts of the power tool illustrated on the graphics page.
Provides technical specifications like article number, voltage, speed, torque, and dimensions for different models.
Instructions on how to charge a battery, its temperature limitations, and signs of a used battery.
Step-by-step guide on how to insert and remove drill bits and accessories using the keyless chuck.
Detailed steps for removing and mounting the keyless chuck, including securing screw and torque.
Safety precautions regarding dust from materials like lead, wood, and asbestos, recommending dust extraction.
How to insert the battery and set the rotational direction switch to avoid unintentional starting.
How to use the rotational direction switch to change between forward and reverse rotation.
How to preselect torque using the ring for controlled screw driving and drilling.
How to select between two speed ranges using the gear selection lever when the machine is at a standstill.
Instructions on how to start and stop the power tool using the On/Off switch.
How to adjust the tool's speed by varying the pressure on the On/Off switch.
How the chuck brakes to a stop when the switch is released and its benefit for screw driving.
Tips for safe operation, like applying the tool to the screw when off and cooling down the machine.
Keep tool and ventilation slots clean, and set rotational direction switch to center during maintenance.
Information on how to contact Bosch for product support, repair, spare parts, and customer inquiries.
Guidelines for environmentally friendly recycling of power tools, accessories, packaging, and batteries.
