To Next Page
A
Andre SheaAug 2, 2025
Why does my Bosch Serie I 6 Iron leak water from the boiler?
- DDavid JohnsonAug 2, 2025
If your Bosch Iron is leaking water from the boiler, it's likely that the boiler cap is loose. Tighten the cap to resolve this issue.
Why does my Bosch Serie I 6 Iron leak water from the boiler?
If your Bosch Iron is leaking water from the boiler, it's likely that the boiler cap is loose. Tighten the cap to resolve this issue.
Why does my Bosch Serie I 6 Iron begin to smoke when I switch it on?
When the Bosch Iron is switched on and begins to smoke, especially during the first use, it's likely due to certain components being lightly greased at the factory. This is normal and should stop after a short period. If it happens during subsequent use, the soleplate may be soiled and needs cleaning according to the cleaning instructions.
What to do if water flows through the holes on the Bosch Serie I 6 Iron soleplate?
If water flows through the holes on the soleplate of your Bosch Iron, it could be due to dirt coming out through the soleplate. To resolve this, point the iron away from the ironing area and press the steam release button until steam is produced. Also, carry out a cleaning cycle and clean the soleplate with a damp cloth. Never add products to the water.
Why is my Bosch Iron making a pumping sound?
The pumping sound your Bosch Iron makes is likely due to water being pumped into the steam tank, which is normal. However, it can also occur if the steam release button has been activated for too long or pressed too frequently; try using the steam release button at intervals. If the sound does not stop, do not use the steam station.
What to do if the “Calc'nClean” indicator light on my Bosch Serie I 6 does not turn off?
If the “Calc'nClean” indicator light on your Bosch Iron remains on, it indicates a build-up of limescale or minerals in the boiler and iron, or that the iron descaling process has been stopped before being completed. Restart and complete the iron descaling process.
Follow general safety guidelines for proper and safe operation of the appliance.
Read important notices carefully for correct use and maintenance of the appliance.
Introduction to the EasyComfort technology for efficient and safe ironing.
Instructions for filling the water tank, including important advice on water types and additives.
Steps to heat up the steam station, including indicator light signals.
Guidance on how to iron with steam, including special functions and vertical steaming.
Explanation of how to use the energy saving setting for efficient ironing.
Details about the auto shut-off feature for safety and energy conservation.
Procedure for descaling the boiler to maintain appliance performance.
Steps to clean the limescale collector to prevent mineral buildup.
Instructions for descaling the iron itself, including soleplate cleaning.
Guidance on regular cleaning of the appliance and its soleplate.
Instructions on how to properly store the steam station after use.
Addresses potential smoke during initial use or subsequent use.
Solutions for water leakage, spots, or dirt appearing through the soleplate.
Troubleshooting for issues with the Calc'nClean indicator light or pumping sounds.
General| Type | Steam Iron |
|---|---|
| Wattage | 2400 W |
| Water tank capacity | 300 ml |
| Auto Shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip System | Yes |
| Anti-calc System | Yes |
