Bosch Sensixx B22L - User Manual

Other manuals for Bosch Sensixx B22L

Operating Instructions160 pages

Questions and Answers

G
gmarshallSep 12, 2025
What to do if water flows through the holes on the soleplate of my Bosch Steam Cleaner?
- L
  Lucas MccoySep 12, 2025
  If water is flowing through the holes on the soleplate of your Bosch Steam Cleaner iron, it could be that the steam function is being used before the iron has reached the correct temperature. Try reducing the steam flow when ironing at low temperatures. Alternatively, water may be condensing inside the pipes. Point the iron away from the ironing area and press the steam release button until steam is produced.
A
Angelica LiAug 25, 2025
How to fix a Bosch Sensixx B22L Iron that does not heat up?
- P
  Peggy VelasquezAug 25, 2025
  If your Bosch Iron does not heat up, first check that the main power switch is set to the “I” position. Also, ensure that the temperature is set to the desired position and not too low.
D
Diane ChristensenAug 25, 2025
What to do if my Bosch Sensixx B22L Iron is not heating up?
- N
  Natalie DouglasAug 26, 2025
  If your Bosch Iron is not heating up, it could be due to the main power button not being switched on or the temperature being set too low. Ensure the main power button is set to the “I” position (illuminated in red) and adjust the temperature to the desired position.
K
Kayla ButlerSep 23, 2025
What to do if my Bosch Steam Cleaner iron doesn't stop steaming on the pad?
- M
  Matthew AndersonSep 23, 2025
  If your Bosch Steam Cleaner iron doesn't stop steaming after placing it on the pad, the “Pulse steam” function may have been activated by a double click. Just press the trigger once again, and the iron will stop steaming immediately.
A
Abigail EdwardsSep 12, 2025
Why is my Bosch Steam Cleaner iron not producing steam?
- S
  Sarah GarrettSep 12, 2025
  If your Bosch Steam Cleaner iron isn't producing steam, first ensure the main power button is set to the 'I' position (illuminated in red) and that the water tank is filled. Also, check that the steam regulation isn't set to the minimum position; increase the steam flow as needed.
C
Casey StewartSep 17, 2025
Why is the soleplate of my Bosch Steam Cleaner turning brown?
- V
  vmooreSep 17, 2025
  The soleplate of your Bosch Steam Cleaner iron may turn brown as a regular consequence of continued use over a long period of time. Clean the soleplate with a damp cloth.
B
Brandy Anderson MDSep 5, 2025
What to do if dirt comes out through the soleplate of my Bosch Sensixx B22L?
- M
  Maria BowmanSep 5, 2025
  If dirt is coming out through the soleplate of your Bosch Iron, it could be due to a build-up of scale or minerals in the steam tank, or because chemical products or additives have been used. To resolve this, use tap water mixed 50% with distilled or demineralised water. Clean the soleplate with a damp cloth and never add products to the water.
R
Ryan SnyderSep 5, 2025
What to do if my ironed garment turns dark and/or sticks to the soleplate of my Bosch Sensixx B22L?
- A
  Alisha LoweSep 6, 2025
  If the ironed garment turns dark and/or sticks to the soleplate of your Bosch Iron, the selected temperature is too high and has damaged the material being ironed. Select a suitable temperature for the garment and clean the soleplate with a damp cloth.
G
Gerald MeyerSep 18, 2025
Why are there water spots on my garment when ironing with my Bosch Steam Cleaner?
- J
  Jeff ContrerasSep 18, 2025
  If water spots appear on the garment during ironing with your Bosch Steam Cleaner, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
L
Lisa MooreAug 30, 2025
What to do if my Bosch Iron begins to smoke when switched on?
- H
  Heather RodriguezAug 30, 2025
  If your Bosch Iron begins to smoke when switched on for the first time, this is because certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. If this happens during subsequent use, the soleplate may be soiled. In this case, clean the soleplate according to the cleaning instructions in the manual.

Summary

General Safety Instructions

Product Overview and Setup

2. Preparations for Use

Details how to release the iron, fill the water tank, and connect the appliance.

Key Ironing Functions

3. i-Temp Function

Provides a pre-set temperature and steam combination suitable for all ironable fabrics.

4. antiShine Function

5. Hygiene Function

Uses hygienic steam technology to remove 99.9% of microbes from fabrics.

Additional Ironing Features and Safety

8. Vertical Steam

10. Auto Shut-off

11. Fabric Protection Soleplate Cover

12. CalcnClean Advanced

Cleaning, Maintenance, and Storage

13. Cleaning and Maintenance

Provides instructions on how to clean the appliance and its soleplate.

Energy Tips, Guarantee, and Problem Solving

17. Trouble Shooting

Lists common problems, their possible causes, and solutions for the appliance.

Bosch Sensixx B22L Specifications

General

Iron power	800 W
Boiler power	1500 W
Product color	Cherry (fruit), White
Soleplate type	-
Water tank capacity	1.3 L
Maximum steam pressure	4.5 bar
Vertical steam function	Yes
Continuous steam performance	110 g/min
Cord length	1.9 m
AC input voltage	230 V
AC input frequency	50 - 60 Hz