Why is my Bosch steam generator not coming on?
If your Bosch steam generator does not come on, there may be a connection problem, so check the mains cable, the plug, and the socket. Another reason could be that the main power switch is not switched on. Set the main power switch to the “I” position.
What to do if water flows through the holes on the soleplate of my Bosch Steam Cleaner?
If water is flowing through the holes on the soleplate of your Bosch Steam Cleaner iron, it could be that the steam function is being used before the iron has reached the correct temperature. Try reducing the steam flow when ironing at low temperatures. Alternatively, water may be condensing inside the pipes. Point the iron away from the ironing area and press the steam release button until steam is produced.
What to do if my Bosch Iron begins to smoke when switched on?
If your Bosch Iron begins to smoke when switched on for the first time, this is because certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. If this happens during subsequent use, the soleplate may be soiled. In this case, clean the soleplate according to the cleaning instructions in the manual.
Why is my Bosch Steam Cleaner iron not heating up?
If your Bosch Steam Cleaner iron isn't heating up, make sure the main power button is set to the 'I' position (illuminated in red). Also, check that the temperature isn't set too low and adjust it to the desired position.
Why does my Bosch Steam Cleaner iron smoke when turned on?
If your Bosch Steam Cleaner iron smokes when first used, this is normal due to factory greasing and should stop shortly. If it smokes during later use, the soleplate may be dirty. Clean the soleplate according to the cleaning instructions.
Why is the soleplate of my Bosch Steam Cleaner turning brown?
The soleplate of your Bosch Steam Cleaner iron may turn brown as a regular consequence of continued use over a long period of time. Clean the soleplate with a damp cloth.
What to do if my Bosch Steam Cleaner iron doesn't stop steaming on the pad?
If your Bosch Steam Cleaner iron doesn't stop steaming after placing it on the pad, the “Pulse steam” function may have been activated by a double click. Just press the trigger once again, and the iron will stop steaming immediately.
What to do if water spots appear on the garment during ironing with my Bosch Iron?
If water spots appear on the garment during ironing with your Bosch Iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board, and iron any water drops to dry them.
What to do if water flows through the holes on the soleplate of my Bosch Iron?
If water flows through the holes on the soleplate of your Bosch Iron, it could be due to several reasons. One reason is that the steam function is being used before the iron has reached the correct temperature; in this case, reduce the steam flow when ironing at low temperatures. Another reason could be that the water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. Finally, the steam generator might contain too much scale, so clean the boiler as described in the manual.
What to do if my Bosch Sensixx B22L Iron is not heating up?
If your Bosch Iron is not heating up, it could be due to the main power button not being switched on or the temperature being set too low. Ensure the main power button is set to the “I” position (illuminated in red) and adjust the temperature to the desired position.
General| Iron power | 800 W |
|---|---|
| Boiler power | 1500 W |
| Product color | Cherry (fruit), White |
| Soleplate type | - |
| Water tank capacity | 1.3 L |
| Maximum steam pressure | 4.5 bar |
| Vertical steam function | Yes |
| Continuous steam performance | 110 g/min |
| Cord length | 1.9 m |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 225 mm |
| Height | 375 mm |
| Weight | 4490 g |
Details how to release the iron, fill the water tank, and connect the appliance.
Provides a pre-set temperature and steam combination suitable for all ironable fabrics.
Uses hygienic steam technology to remove 99.9% of microbes from fabrics.
Provides instructions on how to clean the appliance and its soleplate.
Lists common problems, their possible causes, and solutions for the appliance.
To Next Page
