To Next PageTo Next PageWhy is my Bosch sensixx B20L Iron not heating up?
If your Bosch Iron isn't heating up, first, ensure the main power switch is set to the “I” position. Also, check that the temperature control knob isn't set to the “min” position; adjust it to your desired setting.
Why is my Bosch sensixx B20L not producing steam?
If your Bosch Iron isn't producing steam, make sure the boiler is switched on by setting the main power switch to the “I” position. Also, check if the water tank is empty and fill it if necessary.
Why is water coming out of my Bosch sensixx B20L soleplate?
If water is flowing through the holes on the soleplate of your Bosch Iron, it could be due to a few reasons. First, the temperature control setting might be too low; try turning it to a higher setting (between “••” and “max”) and wait for the pilot light to go out. Alternatively, if the steam is being used for the first time or hasn't been used for a while, water may be condensing inside the pipes; point the iron away from the ironing area and press the steam release button until steam is produced. Finally, the steam generator may contain too much scale; clean the boiler as described in section “Calc’n’Clean” (F).
Why does my Bosch sensixx B20L make a pumping sound?
If your Bosch Iron is making a pumping sound, it's likely because water is being pumped into the steam tank, which is normal. However, if the sound doesn't stop, discontinue use of the steam generator and contact an authorized technical service center.
Why is the soleplate of my Bosch Iron turning brown?
If the soleplate of your Bosch Iron turns brown, it's a regular consequence of usage. Clean the soleplate regularly with a damp cloth.
Why are there waterspots on my garment from my Bosch Iron?
If waterspots appear on the garment during ironing with your Bosch Iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron the spots without steam to dry them.
Why does my Bosch Iron smoke when I turn it on?
If your Bosch Iron starts smoking when you switch it on, especially during the first use, it's likely due to certain components being lightly greased at the factory, which is normal and will stop shortly. However, if it happens during later use, the soleplate may be soiled, so clean it according to the cleaning instructions in this manual.
Why is dirt coming out of my Bosch Iron?
If dirt comes out through the soleplate of your Bosch Iron, it could be due to a build-up of scale or minerals in the steam tank. To resolve this, use tap water mixed 50% with distilled or demineralised water; if your tap water is very hard, mix tap water with distilled water 1:2. It could also be caused by using chemical products or additives. In this case, clean the soleplate with a damp cloth and never add products to the boiler water.
What to do if garment sticks to my Bosch sensixx B20L Iron?
If the ironed garment turns dark or sticks to the soleplate of your Bosch Iron, it means the selected temperature is too high and has damaged the garment. Select a suitable temperature for the material you're ironing and clean the soleplate with a damp cloth.
Why am I experiencing pressure loss with my Bosch sensixx B20L?
If you experience a loss of pressure during ironing with your Bosch Iron, it may be because the steam release button is being activated for a long period of time. Use the steam release button with intervals to improve ironing results, as this allows the textiles to dry and stay smooth better.
General| Type | Steam Iron |
|---|---|
| Power | 2400 W |
| Water Tank Capacity | 300 ml |
| Vertical Steam | Yes |
| Anti-drip System | Yes |
| Anti-Calc System | Yes |
Lists the various parts of the steam ironing system.
Steps to prepare the appliance before first use and for operation.
Detailed instructions on how to use the steam function for ironing.
Guidance on ironing effectively without activating the steam function.
Instructions for using the vertical steam feature on hanging garments.
Information on using the protective cover for delicate fabrics.
General cleaning procedures and how to properly store the appliance.
Procedure for descaling the steam generator to maintain performance.
Procedure to remove scale particles from the steam chamber.
Guidelines for the environmentally sound disposal of the appliance.
Solutions for common problems encountered during appliance use.
