Why am I experiencing loss of pressure during ironing with my Bosch Iron?
If you experience a loss of pressure during ironing with your Bosch Iron, it might be because the steam release button is activated for too long. Use the steam release button at intervals to allow the textiles to dry and stay smooth better.
Why is my Bosch Sensixx B45L not heating up?
If your Bosch Iron isn't heating up, make sure the main power button is set to the “I” position (illuminated in red). Also, check that the temperature isn't set too low and adjust it to the desired position.
What to do if my Bosch Sensixx B45L isn't producing steam?
If your Bosch iron isn't producing steam, ensure the boiler is switched on and the water tank isn't empty. Set the main power button to the “I” position and fill the water tank. Also, check that the steam regulation isn't set to the minimum position; increase the steam flow.
Why do water spots appear when using the 'Pulse steam' function on my Bosch Sensixx B45L?
Water spots appearing on the garment when using the 'Pulse steam' function on your Bosch iron are caused by steam condensation in the hose when cooling down after use. These water drops should stop coming out of the soleplate after using the 'Pulse steam' function for a short time.
Why does the hose of my Bosch Sensixx B45L get hot during use?
If the hose of your Bosch Iron gets hot during use, this is normal. It's caused by the steam passing through the hose during steam ironing. Place the hose on the opposite side to avoid touching it while ironing.
Why is my Bosch Sensixx B45L Iron display not reacting to touch?
If the display of your Bosch iron does not react when touched, clean it with a damp cotton fabric (not too wet). You might also need to warm your fingers a little bit and try again.
Why does my Bosch Sensixx B45L leave water spots on my clothes?
If water spots appear on the garment during ironing with your Bosch Iron, it's likely due to water condensing on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
What to do if my Bosch Sensixx B45L Iron doesn't stop steaming on the pad?
If the iron does not stop steaming after placing it on the pad, the “PulseSteam” function may have been activated by double-clicking. Just press the trigger once again, and the iron will stop steaming at once.
Why is dirt coming out of the soleplate of my Bosch Sensixx B45L?
If dirt is coming out through the soleplate of your Bosch Iron, it could be due to a buildup of scale or minerals in the steam tank. Try using tap water mixed 50% with distilled or demineralized water, or adjust the ratio depending on the hardness of your tap water. Also, clean the soleplate with a damp cloth if you've used chemical products or additives, and never add such products to the water.
Why does my Bosch Iron leak water through the soleplate?
Water flowing through the holes of the soleplate of your Bosch iron can occur because the steam function is being used before the iron has reached the correct temperature, or water is condensing inside the pipes from infrequent use. To resolve this, reduce the steam flow when ironing at low temperatures. You can also point the iron away from the ironing area and press the steam release button until steam is produced.
How to adjust steam levels (low, medium, high) for optimal ironing.
Understanding the meaning of various indicator icons on the display.
Instructions for enabling or disabling audible feedback for touch controls.
The Bosch Sensixx B45L is a steam station designed for efficient and convenient ironing. This advanced ironing system combines a powerful steam generator with an ergonomic iron, offering a range of features to simplify the ironing process and protect various fabric types.
The core function of the Sensixx B45L is to provide continuous, high-pressure steam for effective wrinkle removal. It features a removable water tank (1) that supplies water to an internal steam generator (11) housed within the base unit. The iron (15, 16) is connected to the base unit via a steam hose (6), delivering steam directly to the soleplate (16). The appliance is activated by an illuminated main power button (9) and controlled via a display (8) with touch icons.
The Sensixx B45L offers several intelligent features to enhance the ironing experience:
Regular maintenance ensures the longevity and optimal performance of the Sensixx B45L:
General| Power | 2400 W |
|---|---|
| Soleplate | Ceramic |
| Soleplate Material | Ceramic |
| Steam output | 40 g/min |
| Cord length | 2.5 m |
| Vertical Steam | Yes |
| Anti-Calc System | Yes |
| Drip-Stop System | Yes |
| Auto shut-off | Yes |
| Self-cleaning function | Yes |
| Anti-drip system | Yes |
| Type | Steam Iron |
To Next Page
