Bosch Sensixx B35L User Manual (English)

Other manuals for Bosch Sensixx B35L

Questions and Answers:

J
Jasmine ColeSep 6, 2025
What to do if water flows through the holes on the soleplate of my Bosch Sensixx B35L?
- A
  andrewgardnerSep 6, 2025
  Water flowing through the holes on the soleplate of your Bosch Iron can occur if the steam function is used before the iron reaches the correct temperature, or if water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. It can also happen if the steam generator contains too much scale. Clean the boiler as described in section 'Calc'n'Clean'. There might also be a build up of scale or minerals in the steam tank.
H
Hannah McconnellAug 23, 2025
Why is my Bosch Sensixx B35L not producing steam?
- J
  Julia HillAug 23, 2025
  Your Bosch Iron might not be producing steam because the boiler isn't on, or the water tank is empty. Ensure the main power button is set to the “I” position and the water tank is filled. Also, check that the water tank is correctly fitted onto the housing until you hear a click. If these steps don't work, try increasing the steam flow.
Y
ywolfAug 25, 2025
How to fix a Bosch Iron that won't heat up?
- M
  Michelle ChandlerAug 26, 2025
  If your Bosch Iron isn't heating up, first ensure that the main power button is switched to the “I” position. If it still doesn't heat, check the temperature setting and adjust it to the desired level.
H
Herbert GoodwinAug 26, 2025
How to clean a brown Bosch Iron soleplate?
- J
  Jeffrey JordanAug 27, 2025
  A brown soleplate on your Bosch Iron is a regular consequence of continued use over a long period. Clean the soleplate with a damp cloth.
T
Tony JacksonAug 27, 2025
What to do if my Bosch Sensixx B35L Iron does not produce steam?
- J
  Jeffrey GrossAug 27, 2025
  If your Bosch Iron isn't producing steam, make sure the water tank is correctly fitted onto the housing until you hear a click. The boiler might not be switched on, or the water tank might be empty. Also, the steam regulation might be set to the minimum position.
B
Brandon AdamsAug 28, 2025
How to clean a brown soleplate on my Bosch Sensixx B35L?
- K
  Kristy ShawAug 28, 2025
  A brown soleplate on your Bosch Iron is a normal consequence of continued use over a long period. Clean the soleplate with a damp cloth.
D
deborahkelleySep 10, 2025
Why is there a loss of pressure during ironing with my Bosch Sensixx B35L?
- C
  Christopher HuertaSep 10, 2025
  Loss of pressure during ironing with your Bosch Iron may occur if the steam release button has been activated for too long or pressed too frequently. Use the steam release button at intervals to allow the textiles to be steamed, dried, and ironed properly.
T
thawkinsSep 7, 2025
Why does my Bosch Sensixx B35L Iron make a pumping sound?
- D
  David DunlapSep 7, 2025
  A pumping sound from your Bosch Iron indicates that water is being pumped into the steam tank. Ensure the water tank is correctly fitted onto the housing until you hear a click. If the sound persists, do not use the steam generator and contact an authorised technical service centre.
M
melissariosSep 5, 2025
Why does my Bosch Sensixx B35L smoke when I turn it on?
- S
  Stacey GonzalezSep 5, 2025
  If your Bosch Iron is smoking when first switched on, it may be due to certain components having been lightly greased at the factory. To resolve this, point the iron away from the ironing area and press the steam release button until steam is produced. If it occurs during subsequent use, the soleplate may be soiled, and you should clean it according to the cleaning instructions.
C
Charlene BaxterSep 2, 2025
Why is my Bosch Iron boiler leaking water?
- R
  Ryan WeaverSep 2, 2025
  If your Bosch Iron boiler is leaking water, it's likely because the drainage plug located at the bottom of the appliance is loose. Tighten up the boiler drainage plug with a coin.

Bosch Sensixx B35L Specifications

General

Iron power	2400 W
Product color	Black, Red
Soleplate type	Aluminum soleplate
Variable steam	-
Water tank capacity	1.4 L
Maximum steam pressure	5 bar
Steam boost performance	- g/min
Vertical steam function	Yes
Cord length	1.8 m
AC input voltage	220-240 V