To Next PageTo Next PageWhy does my Bosch Iron leave water spots on clothes?
Water spots appearing on garments during ironing with your Bosch Iron may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
Why does my Bosch Sensixx B35L Iron make a pumping sound?
A pumping sound from your Bosch Iron indicates that water is being pumped into the steam tank. Ensure the water tank is correctly fitted onto the housing until you hear a click. If the sound persists, do not use the steam generator and contact an authorised technical service centre.
Why is my Bosch Sensixx B35L not heating up?
Your Bosch Iron might not be heating up because the main power button is not switched on. Ensure the main power button is set to the 'I' position, which should be illuminated in red. Also, check that the temperature is set to the desired position and not too low.
Why does my Bosch Sensixx B35L smoke when I turn it on?
If your Bosch Iron is smoking when first switched on, it may be due to certain components having been lightly greased at the factory. To resolve this, point the iron away from the ironing area and press the steam release button until steam is produced. If it occurs during subsequent use, the soleplate may be soiled, and you should clean it according to the cleaning instructions.
How to fix a Bosch Sensixx B35L steam generator that won't turn on?
If the steam generator on your Bosch Iron isn't turning on, ensure that the main power button is switched on and set to the 'I' position (illuminated in red). Also, check the mains cable, the plug and the socket to ensure they are properly connected and functioning.
Why is my Bosch Iron boiler leaking water?
If your Bosch Iron boiler is leaking water, it's likely because the drainage plug located at the bottom of the appliance is loose. Tighten up the boiler drainage plug with a coin.
Why is my Bosch Iron losing pressure while ironing?
Loss of pressure during ironing with your Bosch Iron may occur if the steam release button has been activated for too long or pressed too frequently. Use the steam release button at intervals to allow the textiles to be steamed, dried, and ironed properly.
What to do if water comes out of my Bosch Sensixx B35L Iron soleplate?
If water is flowing through the holes on your Bosch Iron's soleplate, it could be due to using the steam function before the iron has reached the correct temperature. Try reducing the steam flow when ironing at low temperatures. It could also be that water is condensing inside the pipes. Point the iron away from the ironing area and press the steam release button until steam is produced. Also, the steam generator may contain too much scale.
What to do if my Bosch Sensixx B35L Iron won't stop steaming?
If your Bosch Iron doesn't stop steaming after placing it on the pad, it may be because the “PulseSteam” function has been activated by double click. Just press the trigger once again and the iron will stop steaming at once.
How to clean a brown soleplate on my Bosch Sensixx B35L?
A brown soleplate on your Bosch Iron is a normal consequence of continued use over a long period. Clean the soleplate with a damp cloth.
General| Iron power | 2400 W |
|---|---|
| Product color | Black, Red |
| Soleplate type | Aluminum soleplate |
| Variable steam | - |
| Water tank capacity | 1.4 L |
| Maximum steam pressure | 5 bar |
| Steam boost performance | - g/min |
| Vertical steam function | Yes |
| Cord length | 1.8 m |
| AC input voltage | 220-240 V |
Weight and Dimensions| Weight | 4570 g |
|---|
Explains the PulseSteam function for tackling difficult creases and softening fabrics.
Instructions for ironing garments without utilizing the steam function.
Details the intelligent steam control system that provides additional steam.
Describes the eco setting for reduced energy and water consumption during ironing.
Explains the automatic shut-off feature for safety and energy saving.
Guide to rinsing the boiler to extend the steam generator's life and prevent scale buildup.
Explains the pilot light that indicates when the boiler requires rinsing.
