To Next PageTo Next PageWhy does my Bosch Iron not heat up?
Your Bosch Iron might not be heating up because the temperature control is set to the minimum position. To resolve this, turn the temperature control to a higher setting. Alternatively, the 'secure' system may have been activated, setting the iron to stand-by. Simply move the iron gently to reconnect it.
What to do if clothes stick to my Bosch Iron?
If your clothes are sticking to the Bosch Iron, it could be due to several reasons: * The temperature may be too high. Try turning the temperature control down and wait for the iron to cool. * The temperature could also be too low. Adjust the temperature control to a higher setting (between “••” and “max”) and wait for the pilot light to go out. * The steam setting might be too high. Set the steam regulator to a lower setting. * If using the shot of steam button, wait 5 seconds between each press.
Why is water dripping from my Bosch Sensixx’x DA50 Iron soleplate?
Water may drip from the Bosch Iron's soleplate if: * The temperature control setting is too low. * The steam regulator is set too high in conjunction with a low temperature. * You have pressed the shot of steam button repeatedly without waiting 5 seconds between each press.
How to fix Bosch Iron when steam does not come out?
If steam is not coming out of your Bosch Iron, it could be due to the following reasons: * The steam regulator is set to the “0” position. Adjust the steam regulator to a higher position. * The temperature is too low. Increase the temperature setting, ensuring it is compatible with the fabric you are ironing. * The anti-drip system is activated, which is normal and should stop after a few minutes.
What does it mean when the 'Auto off' indicator lamp flashes on my Bosch Iron?
The 'Auto off' indicator lamp flashes on your Bosch Iron when the 'secure' system has been activated, placing the iron in stand-by mode.
Why are there deposits coming out of the soleplate holes of my Bosch Iron?
Deposits coming out of the soleplate holes of your Bosch Iron may be caused by the lubrication of some of the internal parts. To resolve this, carry out a cleaning cycle, as described in the “Calc’nClean” section.
Essential safety guidelines for using the Bosch steam iron, covering unattended use, handling, and electrical safety.
Guidance on how to dispose of obsolete appliances and packaging in an environmentally friendly manner.
Instructions for filling the water tank with tap water, including water quality recommendations and maximum fill level.
Guide to adjusting the soleplate temperature using the control dial and temperature index for different fabric types.
Covers steam ironing, shot of steam, vertical steam, and dry ironing modes for various fabric care needs.
Details on the DripStop feature to prevent dripping and the spray function for dampening fabrics.
Explanation of the automatic shut-off feature for enhanced safety and energy saving, including its activation and reset.
Overview of descaling systems including 'Self-Clean', 'Calc'nClean', and using descaling liquid for deep cleaning.
Information on the 'TextileProtect' accessory for steam-ironing delicate fabrics safely at high temperatures.
Description of the 'StoreProtect' accessory for immediate and safe storage of the iron, even when hot.
Resolving problems related to the iron not heating up or clothes sticking to the soleplate.
Addressing issues with steam not coming out, water dripping, or excessive steaming/dripping.
Explanation of initial smoke and troubleshooting scale deposits on the soleplate and in the steam chamber.
General