Why is my Bosch Iron not heating up?
If your Bosch Iron is not heating up, there are a few potential causes. First, check if the temperature control is set to the minimum; if so, turn it to a higher setting. Another possibility is that the 'secure' or 'SensorSecure' system has been activated, placing the iron in standby mode. To reconnect, gently move the iron or grip the handle to restart it.
Why is there no steam coming out of my Bosch Sensixx'x DA30 Iron?
If steam does not come out of your Bosch Iron, ensure the steam regulator is not set to the [ ] position; adjust it to a higher setting. Also, verify that the temperature isn't too low; increase it if the fabric is compatible. Note that the anti-drip system may be activated, which is normal and will resolve itself after a few minutes.
Why is water dripping from my Bosch Iron?
If water drips out of the soleplate of your Bosch Iron along with steam, it could be because the temperature control setting is too low or the steam regulator is set too high in conjunction with a low temperature. It can also happen if you press the shot of steam button repeatedly without waiting 5 seconds between each press.
What to do if clothes stick to my Bosch Sensixx'x DA30 Iron?
If the clothes tend to stick to your Bosch Iron, it could be due to several reasons. The temperature might be too high, so try turning the temperature control down and waiting for the iron to cool. Alternatively, the temperature setting might be too low, so adjust it to between “••” and “max” and wait until the pilot light goes out. You could also try setting the steam regulator to a lower setting or waiting 5 seconds between each press of the shot of steam button.
What to do if the “auto off” indicator lamp flashes on my Bosch Iron?
The “auto off” indicator lamp flashes on your Bosch Iron because the “secure” system has been activated, setting the iron to stand-by. To reconnect the iron, gently move it or grip the handle to restart it.
Why does my new Bosch Iron smoke when first used?
When you connect your Bosch Iron for the first time, smoke may come out due to the lubrication of some internal parts.
Information on how to dispose of obsolete appliances and compliance with WEEE directive.
Instructions on how to fill the water tank with tap water or a mixture.
Guide on adjusting the soleplate temperature for different fabrics using the control.
How to use the steam regulator to adjust steam output for effective ironing.
Using the steam shot button to remove stubborn wrinkles or create creases.
How the self-clean system removes scale deposits with each steam regulator use.
Using the Calc'nClean function to remove scale particles from the steam chamber.
The role of the anti-calc cartridge in reducing scale build-up and extending iron life.
General| Type | Steam iron |
|---|---|
| Cordless | No |
| Cord length | 2 m |
| Certification | CE, ROSTEST, VDE |
| Product color | Blue, White |
| Soleplate type | - |
| Variable steam | Yes |
| Water tank capacity | 0.32 L |
| Steam boost performance | 160 g/min |
| Continuous steam performance | 40 g/min |
| Iron power | 2600 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 290 mm |
|---|---|
| Width | 121 mm |
| Height | 150 mm |
| Weight | 1500 g |
| Package depth | 340 mm |
| Package width | 130 mm |
| Package height | 180 mm |
| Package weight | 1600 g |
To Next Page