15
B O S C H
* Model dependent
16
Cleaning &
Maintenance
Attention! Risk of burns!
Always unplug the appliance from
the mains supply before carrying
out any cleaning or maintenance
operation on it.
1. After ironing, disconnect the plug
and allow the appliance to cool down
before cleaning.
2. Wipe the housing, handle and iron
body with a damp cotton cloth.
3. If the soleplate is soiled with dirt or
scale, clean it with a damp cotton
cloth.
4. If the cloth is synthetic, it may melt
due to the high temperature on the
soleplate (16). Switch off the steam
and rub off any residue immediately
with a thickly folded, dry cotton cloth.
5. Never use abrasive products or
solvents. To keep the soleplate
(16) smooth, you should avoid hard
contact with metal objects. Never use
a scouring pad, or chemicals to clean
the soleplate.
17
Storing the
appliance
1. Always allow the appliance to cool
down before storing it.
2. Set the main power button to the “0”
position (the red light will go off) and
disconnect the mains cable.
3. Empty the water tank.
4. Place the iron on the iron pad (2),
standing on the soleplate, and x it
by inserting the tip of the iron into the
front slot and moving the SecureLock
lever (10) against the heel of the iron.
5. Store the mains cable (5) and steam
hose (6) in the storage compartment
(4). Do not wrap the cords too tight.
6. Use the iron´s handle when moving
the appliance, as shown in gure
below, or use the carrying handles (3)
on either side.
To Next Page
Loading...
