To Next Page
L
lucasclaytonSep 12, 2025
How to fix a Bosch Sensixx DS37 with a flashing pilot light?
- AAmanda SmithSep 12, 2025
To address a flashing pilot light on your Bosch Iron, rinse the boiler according to the cleaning instructions in this manual.
How to fix a Bosch Sensixx DS37 with a flashing pilot light?
To address a flashing pilot light on your Bosch Iron, rinse the boiler according to the cleaning instructions in this manual.
How to fix a Bosch Sensixx DS37 Iron that does not heat up?
If your Bosch Iron is not heating up, ensure that the main power button is set to the “I” position. Also, make sure the temperature is set to the desired position, and check the mains cable, the plug, and the socket.
Why is my Bosch Sensixx DS37 not producing any steam?
If your Bosch Iron isn't producing steam, ensure the main power button is set to the “I” position (illuminated in red), and that the water tank is filled. Also, make sure the water tank is correctly fitted onto the housing until you hear a click, and increase the steam flow if the steam regulation is at its minimum.
What does it mean if the pilot light flashes on my Bosch Sensixx DS37?
If the pilot light on your Bosch Iron is flashing, rinse the boiler according to the cleaning instructions in this manual.
Why did the soleplate on my Bosch Iron turn brown?
If the soleplate of your Bosch Iron turns brown, this is a regular consequence of continued use over a long period of time. Clean the soleplate with a damp cloth.
Why does my Bosch Sensixx DS37 Iron smoke when turned on?
If your Bosch Iron is smoking when first switched on, this may be due to certain components being lightly greased at the factory. If it occurs during later use, the soleplate may be soiled. Clean the soleplate according to the cleaning instructions in this manual. This could also be caused by using the steam function before it has reached the correct temperature, water condensing inside the pipes, or a build up of scale or minerals in the steam tank.
What to do if the steam generator of Bosch Sensixx DS37 does not come on?
If the steam generator of your Bosch Iron isn't coming on, it could be due to a connection problem or because the main power button isn't switched on. Set the main power button (7) to the 'I' position, so that it is illuminated in red.
How to fix water leakage from the boiler of a Bosch Sensixx DS37?
If your Bosch Iron is leaking water from the boiler, check if the scale collector located at the bottom of the appliance is loose and tighten it.
What to do if there is loss of pressure during ironing with a Bosch Sensixx DS37?
Loss of pressure during ironing with your Bosch Iron usually means the steam release button has been activated too frequently. Use the steam release button at intervals to allow the textiles to be steamed, dried, and ironed properly, improving the ironing result.
What to do if dirt comes out through the soleplate of my Bosch Sensixx DS37?
If dirt comes out through the soleplate of your Bosch Iron, this may be due to a build-up of scale or minerals in the steam tank, or because chemical products or additives have been used. To resolve this, use tap water mixed 50% with distilled or demineralised water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Never add any products to the water.
Automatic temperature and steam setting for all fabric types.
Minimizes shiny marks on garments during ironing.
Guide for setting optimal temperature and steam levels.
Conserves energy and water during operation.
Enhances safety by automatically turning off the unit.
General