Why do water spots appear on the garment during ironing with my Bosch Sensixx DS37 Iron?
If water spots appear on the garment during ironing with your Bosch Iron, this may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board, and iron any water drops to dry them.
How to fix a Bosch Sensixx DS37 with a flashing pilot light?
To address a flashing pilot light on your Bosch Iron, rinse the boiler according to the cleaning instructions in this manual.
What to do if dirt comes out through the soleplate of my Bosch Sensixx DS37?
If dirt comes out through the soleplate of your Bosch Iron, this may be due to a build-up of scale or minerals in the steam tank, or because chemical products or additives have been used. To resolve this, use tap water mixed 50% with distilled or demineralised water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Never add any products to the water.
Is it normal for the hose of my Bosch Iron to get hot during use?
This is normal if your Bosch Iron hose gets hot during use. It is caused by the steam passing through the hose during steam ironing.
Why is my Bosch Iron making a pumping sound?
The appliance makes a pumping sound because water is being pumped into the steam tank.
Why does my Bosch Sensixx DS37 Iron smoke when turned on?
If your Bosch Iron is smoking when first switched on, this may be due to certain components being lightly greased at the factory. If it occurs during later use, the soleplate may be soiled. Clean the soleplate according to the cleaning instructions in this manual. This could also be caused by using the steam function before it has reached the correct temperature, water condensing inside the pipes, or a build up of scale or minerals in the steam tank.
What does it mean if the pilot light flashes on my Bosch Sensixx DS37?
If the pilot light on your Bosch Iron is flashing, rinse the boiler according to the cleaning instructions in this manual.
What to do if water flows through the holes on the soleplate of my Bosch Iron?
If water flows through the holes on the soleplate of your Bosch Iron, it's likely that the steam function is being used before the iron has reached the correct temperature. To resolve this, point the iron away from the ironing area and press the steam release button until steam is produced.
Why is my Bosch Sensixx DS37 not heating up?
If your Bosch Iron is not heating up, ensure that the main power button is in the “I” position (illuminated in red). Also, check that the temperature isn't set too low and adjust it to your desired level.
Why is my Bosch Sensixx DS37 not producing any steam?
If your Bosch Iron isn't producing steam, ensure the main power button is set to the “I” position (illuminated in red), and that the water tank is filled. Also, make sure the water tank is correctly fitted onto the housing until you hear a click, and increase the steam flow if the steam regulation is at its minimum.
Automatic temperature and steam setting for all fabric types.
Minimizes shiny marks on garments during ironing.
Guide for setting optimal temperature and steam levels.
Conserves energy and water during operation.
Enhances safety by automatically turning off the unit.
To Next Page
General