12
B O S C H
Automatic clean warning
(Model dependent)
Pilot light (6) will ash indicating that
boiler must be rinsed.
To reset the “Calc’n’Clean” counter,
switch the steam station off twice,
keeping it off for at least 30 seconds
each time.
(on → 30s off → on → 30s off → on)
12
Cleaning &
Maintenance
E
Attention! Risk of burns!
Always unplug the appliance
from the mains supply before
carrying out any cleaning or
maintenance operation on it.
1. After ironing, pull out the plug and
allow the appliance to cool down
before cleaning.
2. Wipe the housing, handle and iron
body with a damp cotton cloth.
3. If the soleplate is soiled with dirt or
scale, clean it with a damp cotton
cloth.
4. If the cloth is synthetic, it may melt
due to the high temperature on the
soleplate (16). Switch off the steam
and rub off any residue immediately
with a thickly folded, dry cotton cloth.
5. Never use abrasive products or
solvents. To keep the soleplate
smooth, you should avoid hard
contact with metal objects. Never use
a scouring pad, or chemicals to clean
the soleplate.
13
Storing the
appliance
To Next Page
Loading...
