Why does my Bosch Sensixx B45L Iron smoke when switched on?
If your Bosch Iron begins to smoke when switched on, during the first use, it's normal for certain components to produce a little smoke due to light greasing at the factory; this will stop after a short while. During subsequent use, the soleplate may be soiled, so clean it according to the cleaning instructions in this manual.
Why does the ironed garment turn dark and/or stick to the soleplate of my Bosch Sensixx B45L Iron?
If the ironed garment turns dark or sticks to the soleplate of your Bosch Iron, it means that the selected temperature is too high and has damaged the material. Select a suitable temperature for the garment and clean the soleplate with a damp cloth.
Why does the soleplate of my Bosch Sensixx B45L turn brown?
If your Bosch Iron soleplate turns brown, it is a regular consequence of usage. Clean the soleplate with a damp cloth.
Why does my Bosch Iron make a pumping sound?
If your Bosch Iron is making a pumping sound, it is likely due to water being pumped into the steam tank, which is normal. Also, ensure the water tank is correctly inserted in the housing. However, if the sound persists, stop using the steam generator and contact an authorised technical service centre.
Why am I experiencing loss of pressure during ironing with my Bosch Iron?
If you experience a loss of pressure during ironing with your Bosch Iron, it might be because the steam release button is activated for too long. Use the steam release button at intervals to allow the textiles to dry and stay smooth better.
Why can't I hear the beep when touching the display of my Bosch Sensixx B45L Iron?
If you're hearing no beep when touching the display of your Bosch Iron, it might be because the beep has been deactivated. Reactivate it according to the instructions in this manual.
Why does the steam generator of my Bosch Sensixx B45L Iron not come on?
If your Bosch Iron steam generator does not come on, check the mains cable, plug, and socket for connection problems. Also, make sure the main power button is set to the “I” position (illuminated in red).
General| Power | 2400 W |
|---|---|
| Soleplate | Ceramic |
| Soleplate Material | Ceramic |
| Steam output | 40 g/min |
| Cord length | 2.5 m |
| Vertical Steam | Yes |
| Anti-Calc System | Yes |
| Drip-Stop System | Yes |
| Auto shut-off | Yes |
| Self-cleaning function | Yes |
| Anti-drip system | Yes |
| Type | Steam Iron |
How to adjust steam levels (low, medium, high) for optimal ironing.
Understanding the meaning of various indicator icons on the display.
Instructions for enabling or disabling audible feedback for touch controls.
To Next Page
