To Next Page
C
csmithAug 30, 2025
Why does my Bosch Iron soleplate turn brown?
- SStanley GarrettAug 30, 2025
The soleplate turning brown is a normal consequence of using the iron over a long period of time. To clean it, wipe the soleplate with a damp cloth.
Why does my Bosch Iron soleplate turn brown?
The soleplate turning brown is a normal consequence of using the iron over a long period of time. To clean it, wipe the soleplate with a damp cloth.
Why does my Bosch Sensixx B45L leak water from the boiler?
If you notice water leakage from the boiler of your Bosch Iron, it is likely that the filter located at the side of the appliance is loose. Try to tighten up the filter.
What to do if water spots appear on garment during Bosch Sensixx B45L Iron “Pulse steam” function?
If water spots appear on the garment during use of the “Pulse steam” function on your Bosch iron, it's due to steam condensation in the hose when cooling down after use. These water drops should stop coming out of the soleplate after using the “Pulse steam” function for some time.
Why does my Bosch Sensixx B45L leave water spots on clothes while ironing?
If water spots appear on the garment during ironing with your Bosch iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
Why am I experiencing loss of steam pressure with my Bosch Sensixx B45L Iron?
If you're experiencing a loss of steam pressure during ironing with your Bosch Iron, it could be because the steam release button has been activated for too long or too frequently. Use the steam release button at intervals to improve ironing results, allowing the textiles to be steamed, dried, and ironed properly.
Why does my Bosch Sensixx B45L leave water spots on my clothes?
If water spots appear on the garment during ironing with your Bosch Iron, it's likely due to water condensing on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
General| Power | 2400 W |
|---|---|
| Soleplate | Ceramic |
| Soleplate Material | Ceramic |
| Steam output | 40 g/min |
| Cord length | 2.5 m |
| Vertical Steam | Yes |
| Anti-Calc System | Yes |
| Drip-Stop System | Yes |
| Auto shut-off | Yes |
| Self-cleaning function | Yes |
| Anti-drip system | Yes |
| Type | Steam Iron |
How to adjust steam levels (low, medium, high) for optimal ironing.
Understanding the meaning of various indicator icons on the display.
Instructions for enabling or disabling audible feedback for touch controls.
