Bosch Sensixx B22L User Manual (English)

Other manuals for Bosch Sensixx B22L

Questions and Answers:

G
gmarshallSep 12, 2025
What to do if water flows through the holes on the soleplate of my Bosch Steam Cleaner?
- L
  Lucas MccoySep 12, 2025
  If water is flowing through the holes on the soleplate of your Bosch Steam Cleaner iron, it could be that the steam function is being used before the iron has reached the correct temperature. Try reducing the steam flow when ironing at low temperatures. Alternatively, water may be condensing inside the pipes. Point the iron away from the ironing area and press the steam release button until steam is produced.
A
Angelica LiAug 25, 2025
How to fix a Bosch Sensixx B22L Iron that does not heat up?
- P
  Peggy VelasquezAug 25, 2025
  If your Bosch Iron does not heat up, first check that the main power switch is set to the “I” position. Also, ensure that the temperature is set to the desired position and not too low.
D
Diane ChristensenAug 25, 2025
What to do if my Bosch Sensixx B22L Iron is not heating up?
- N
  Natalie DouglasAug 26, 2025
  If your Bosch Iron is not heating up, it could be due to the main power button not being switched on or the temperature being set too low. Ensure the main power button is set to the “I” position (illuminated in red) and adjust the temperature to the desired position.
M
melissaedwardsAug 26, 2025
What to do if water flows through the holes on the soleplate of my Bosch Iron?
- P
  pgeorgeAug 26, 2025
  If water flows through the holes on the soleplate of your Bosch Iron, it could be due to several reasons. One reason is that the steam function is being used before the iron has reached the correct temperature; in this case, reduce the steam flow when ironing at low temperatures. Another reason could be that the water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. Finally, the steam generator might contain too much scale, so clean the boiler as described in the manual.
A
Abigail EdwardsSep 12, 2025
Why is my Bosch Steam Cleaner iron not producing steam?
- S
  Sarah GarrettSep 12, 2025
  If your Bosch Steam Cleaner iron isn't producing steam, first ensure the main power button is set to the 'I' position (illuminated in red) and that the water tank is filled. Also, check that the steam regulation isn't set to the minimum position; increase the steam flow as needed.
S
Sarah FreemanSep 12, 2025
Why does my Bosch Steam Cleaner iron smoke when turned on?
- E
  Elizabeth WoodSep 12, 2025
  If your Bosch Steam Cleaner iron smokes when first used, this is normal due to factory greasing and should stop shortly. If it smokes during later use, the soleplate may be dirty. Clean the soleplate according to the cleaning instructions.
B
Brandy Anderson MDSep 5, 2025
What to do if dirt comes out through the soleplate of my Bosch Sensixx B22L?
- M
  Maria BowmanSep 5, 2025
  If dirt is coming out through the soleplate of your Bosch Iron, it could be due to a build-up of scale or minerals in the steam tank, or because chemical products or additives have been used. To resolve this, use tap water mixed 50% with distilled or demineralised water. Clean the soleplate with a damp cloth and never add products to the water.
R
Ryan SnyderSep 5, 2025
What to do if my ironed garment turns dark and/or sticks to the soleplate of my Bosch Sensixx B22L?
- A
  Alisha LoweSep 6, 2025
  If the ironed garment turns dark and/or sticks to the soleplate of your Bosch Iron, the selected temperature is too high and has damaged the material being ironed. Select a suitable temperature for the garment and clean the soleplate with a damp cloth.
E
Elaine OlsonAug 31, 2025
Why is my Bosch steam generator not coming on?
- M
  Michael PattonSep 1, 2025
  If your Bosch steam generator does not come on, there may be a connection problem, so check the mains cable, the plug, and the socket. Another reason could be that the main power switch is not switched on. Set the main power switch to the “I” position.
L
Lisa MooreAug 30, 2025
What to do if my Bosch Iron begins to smoke when switched on?
- H
  Heather RodriguezAug 30, 2025
  If your Bosch Iron begins to smoke when switched on for the first time, this is because certain components on the appliance have been lightly greased at the factory and may produce a little smoke when initially heated. If this happens during subsequent use, the soleplate may be soiled. In this case, clean the soleplate according to the cleaning instructions in the manual.

Bosch Sensixx B22L Specifications

General

Iron power	800 W
Boiler power	1500 W
Product color	Cherry (fruit), White
Soleplate type	-
Water tank capacity	1.3 L
Maximum steam pressure	4.5 bar
Vertical steam function	Yes
Continuous steam performance	110 g/min
Cord length	1.9 m
AC input voltage	230 V
AC input frequency	50 - 60 Hz