What to do if my Bosch Steam Cleaner iron doesn't stop steaming on the pad?
If your Bosch Steam Cleaner iron doesn't stop steaming after placing it on the pad, the “Pulse steam” function may have been activated by a double click. Just press the trigger once again, and the iron will stop steaming immediately.
What to do if the ironed garment turns dark and/or sticks to the soleplate of my Bosch Sensixx B22L?
If the ironed garment turns dark and/or sticks to the soleplate of your Bosch Iron, the selected temperature is too high and has damaged the garment. Select a suitable temperature for the material being ironed and clean the soleplate with a damp cloth.
How to fix a Bosch Sensixx B22L Iron that does not heat up?
If your Bosch Iron does not heat up, first check that the main power switch is set to the “I” position. Also, ensure that the temperature is set to the desired position and not too low.
What to do if my Bosch Sensixx B22L Iron is not heating up?
If your Bosch Iron is not heating up, it could be due to the main power button not being switched on or the temperature being set too low. Ensure the main power button is set to the “I” position (illuminated in red) and adjust the temperature to the desired position.
What to do if water flows through the holes on the soleplate of my Bosch Iron?
If water flows through the holes on the soleplate of your Bosch Iron, it could be due to several reasons. One reason is that the steam function is being used before the iron has reached the correct temperature; in this case, reduce the steam flow when ironing at low temperatures. Another reason could be that the water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. Finally, the steam generator might contain too much scale, so clean the boiler as described in the manual.
What to do if water spots appear on the garment during ironing with my Bosch Iron?
If water spots appear on the garment during ironing with your Bosch Iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board, and iron any water drops to dry them.
What to do if water spots appear when using the “PulseSteam” function on my Bosch Sensixx B22L?
If water spots appear on the garment during use of the “PulseSteam” function on your Bosch Iron, it is because water spots are caused by steam condensation in the hose when cooling down after use. Water drops stop coming out of the soleplate after using the “PulseSteam” function for some time.
What should I do if there's water leakage from the filter located at the side of my Bosch Sensixx B22L?
Tighten up the filter.
Why do water spots appear on the garment during ironing with my Bosch Sensixx B22L?
Water spots may appear on the garment during ironing with your Bosch Iron because of steam condensed on the ironing board. Wipe the textile cover of the ironing board and iron any water drops to dry them.
What to do if there is water leakage from the boiler of my Bosch Iron?
If there is water leakage from the boiler of your Bosch Iron, the scale collector located at the side of the appliance may be loose. Tighten up the scale collector.
General| Iron power | 800 W |
|---|---|
| Boiler power | 1500 W |
| Product color | Cherry (fruit), White |
| Soleplate type | - |
| Water tank capacity | 1.3 L |
| Maximum steam pressure | 4.5 bar |
| Vertical steam function | Yes |
| Continuous steam performance | 110 g/min |
| Cord length | 1.9 m |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 225 mm |
| Height | 375 mm |
| Weight | 4490 g |
Details how to release the iron, fill the water tank, and connect the appliance.
Provides a pre-set temperature and steam combination suitable for all ironable fabrics.
Uses hygienic steam technology to remove 99.9% of microbes from fabrics.
Provides instructions on how to clean the appliance and its soleplate.
Lists common problems, their possible causes, and solutions for the appliance.
To Next Page
