Bosch 6 Series - Page 54

en Appliance care
54
4. Set the programme to position 4.
’˜‚ and the programme duration will
now alternate on the display.
5. Pour approx. 1 ^ litre of warm tap
water into the condensation
container.
Note: Hold the full condensation
container horizontally at all times so
that no liquid spills out.
6. Slide in the condensation container
until it clicks into place.
7. Press A (Start/Pause).
The appliance care programme will start
and an audible signal will sound.
“Ÿš will appear on the display once the
appliance care programme has ended
and an audible signal will sound.
8. Pull out the condensation container
horizontally and empty it.
9. Slide in the condensation container
until it clicks into place.
10.Press # to switch off the appliance.
You have now completed the appliance
care programme.


#
+
3
;