English – 24
1 270 020 Wen | (13.5.16) Bosch eBike Systems
When you switch on Nyon, it begins the satellite search to receive GPS
signals. Once a sufficient number of satellite signals is found, the operating
mode displays “Map & Navigation” on the map with the current location.
In case of unfavourable weather conditions or locations, the satellite
search may take a little longer. If the application fails to find satellites over
a long period of time, restart Nyon.
Pressing the joystick 1 to the right enables you to choose from the follow-
ing options:
– “Navigate”
You can use the “Enter Destination” menu item to enter the destina-
tion address. To do so, use the joystick to select the letters from the list
and confirm each selection by pressing the joystick. Once you have en-
tered the destination, you will be offered three different routes
(“Short/MTB”, “Scenic” and “Fast”) displaying the elevation profile.
The “Short” route shows you the shortest way from your location to
your selected destination (only for eBikes up to 45 km/h).
The “MTB” route guides the cyclist over mostly unpaved trails and
offers the best route for mountain bikers (not for eBikes up to 45 km/h).
The “Scenic” route shows you the most scenic connection from your
location to your selected destination and avoids main roads.
The “Fast” route shows you the fastest connection from your location to
your selected destination while avoiding steeper slopes.
The different “Short/MTB”, “Scenic” and “Fast” routes may be identi-
cal on short routes.
Navigation will start once you have selected your preferred route. Route
planning can also be performed using the “Bosch eBike Connect”
application and in the online portal.
Alternatively, you can opt to be guided home, select one of the last
destinations used, or choose from saved locations and routes.
To Next Page
Loading...
Need help?
General
