English – 47
Bosch eBike Systems 1 270 020 Wen | (13.5.16)
“Custom Modes”: This setting option is available only if you have pur-
chased it via the shop.
– “Map Manager”: Use the “Map Manager” to load any map directly to
Nyon.
You can choose from three layouts for
the custom views in the upper section
(A) and you can select the data you
want to have displayed in both sec-
tions. This is done by selecting the
corresponding field in the middle sec-
tion (B) and then selecting the desired
values or graphs from the list in the
lower section (C). Save the view to
complete the procedure. If there is an
existing Bluetooth® connection, the
view will then be automatically trans-
ferred to the Nyon.
You can configure four different riding modes
however you like. For the configuration there
are five definable “checkpoints” or stages
available. For the middle three points you can
select any desired performance assistance for
a certain speed. For the outer two points you
can only select the performance assistance.
The speed is plotted on the horizontal x-axis
and the performance assistance on the vertical
y-axis in percent. If you are happy with the
definition, save the riding mode. If there is an
existing Bluetooth® connection, the riding
mode will then be automatically transferred to
the Nyon.
To Next Page
Loading...
Need help?
General
