English | 21
Bosch Power Tools 1 609 92A 3B0 | (8.3.17)
HCS plunge cut
saw blade, wood
Wooden materials,
Soft plastics
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Bi-metal plunge
cut saw blade,
hardwood
Hardwood,
Laminated panels
Plunge cuts in laminated panels or hardwood;
example: installing skylights
TC plunge cut saw
blade, metal
Metal,
Severely abrasive materi-
als,
Fibreglass,
Plasterboard,
Cement-bonded fibre
boards
Plunge cuts in severely abrasive materials or metal;
example: cutting kitchen front covers, easy cutting through
hardened screws, nails and stainless steel
BIM plunge cut
saw blade, wood
and metal
Softwood,
Hardwood,
Veneered panels,
Plastic-laminated panels,
Non-hardened nails and
screws
Plunge cuts in laminated panels or hardwood;
example: shortening door frames, cutting openings for a
shelf
HM-Riff segment
saw blade
Cement joints,
Soft wall tiles,
Glass fibre reinforced
plastics,
Porous concrete
Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
Diamond-Riff seg-
ment saw blade
Cement joints,
Soft wall tiles,
Epoxy resin,
Glass fibre reinforced
plastics
Precise routing and cutting of tile/joint material, epoxy res-
ins and glass fibre reinforced plastics;
example: making smaller cutouts in soft wall tiles and rout-
ing openings in glass fibre reinforced plastic
HM-Riff delta plate
Mortar,
Concrete residues,
Wood,
Abrasive materials
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when
replacing damaged tiles), removing carpet adhesive resi-
dues
HM-Riff grout and
mortar remover
Mortar,
Joints,
Epoxy resin,
Glass fibre reinforced
plastics,
Abrasive materials
Routing and cutting joint and tile material and rasping and
sanding on hard surfaces;
example: removing tile adhesive and grout
HCS multi blade
Roofing felt,
Carpets,
Artificial turf,
Cardboard,
PVC flooring
Fast, precise cutting of soft material and flexible abrasive
materials;
example: cutting carpets, cardboard, PVC flooring, roofing
felt, etc.
Scraper, rigid
Carpets,
Mortar,
Concrete,
Tile adhesive
Scraping on hard surfaces;
example: removing mortar, tile adhesive, concrete and car-
pet adhesive residues
Scraper, flexible
Carpet adhesive,
Paint residues,
Silicone
Flexible scraping on soft surfaces;
example: removing silicone joints, carpet adhesive and
paint residues
Accessory Material Application
OBJ_BUCH-2966-001.book Page 21 Wednesday, March 8, 2017 9:58 AM
To Next Page
Loading...
Need help?
General
