To Next PageTo Next Page
Need help?Do you have a question about the Bosch AG40-85P and is the answer not in the manual?
General| Power | 850 W |
|---|---|
| Wheel Diameter | 4-1/2 in |
| No Load Speed | 11, 000 RPM |
| Weight | 5.1 lbs |
| Spindle Thread | 5/8 in - 11 UNC |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Arbor Size | 5/8 in |
| Spindle Lock | Yes |
| Rated Input Power | 850 W |
Keep work area clean and well lit to prevent accidents.
Ensure proper plug matching and avoid contact with grounded surfaces to prevent shock.
Stay alert, use common sense, and wear protective equipment for personal protection.
Have tools serviced by qualified personnel using identical replacement parts.
Understand kickback causes and how to avoid it for safer operation.
Specific safety measures for grinding and cutting operations to prevent injury.
Safety precautions for sanding and wire brushing operations.
Safety precautions for sanding and wire brushing operations.
Explains symbols for voltage, current, speed, and measurements.
Covers warning symbols, recycling seals, and manual references.
Details specifications for angle grinders with paddle switches.
Details specifications for angle grinders with slide switches.
Guide to using the tool for grinding and cutting various materials.
Guide to using the tool for sanding and wire brushing tasks.
Explains electronic clutch, constant response, soft start, and overload protection.
Description of the variable speed adjustment feature.
Step-by-step instructions for attaching and adjusting wheel guards.
Instructions for mounting Type 27 grinding wheels and flap disks.
Instructions for installing spin-on wheels without flanges.
Instructions for mounting Type 1 cutting wheels.
Instructions for mounting Type 27 cutting wheels.
Steps for installing the concrete dust extraction attachment.
Instructions for installing backing pads and sanding discs.
Instructions for installing wire cup brushes.
Instructions for rotating the gearbox for improved ergonomics.
Steps to install the masonry Type 1 cutting guard.
Instructions for installing a dry diamond wheel.
Instructions for installing a wire wheel.
How to operate the tool using the paddle switch.
How to operate the tool using the slide switch.
Proper techniques and tips for effective metal grinding.
Techniques for cutting masonry and concrete materials.
How to perform concrete surfacing operations.
Techniques and grit selection for sanding operations.
Tips for proper use and care of wire brushes.
Information on tool maintenance, brushes, and cleaning.
Guidelines for selecting appropriate extension cords.
List of included and optional accessories.
Details of the limited warranty for Bosch power tools.
