To Next PageTo Next Page
Need help?Do you have a question about the Bosch AG50-11VS and is the answer not in the manual?
Keep work area clean and well lit. Avoid explosive atmospheres. Keep children and bystanders away.
Match plugs to outlets, avoid adapter plugs. Use grounded tools with 3-wire cords. Avoid body contact with grounded surfaces.
Stay alert, use common sense. Use PPE (eye protection, dust mask, safety shoes, hard hat, hearing protection). Prevent unintentional starting.
Have power tool serviced by a qualified repair person using only identical replacement parts. Recommend Bosch Factory Service Center.
Covers PPE, bystander safety, cord handling, tool positioning, vent cleaning, and avoiding flammables/coolants.
Details kickback causes and prevention, proper wheel/guard selection, and usage guidelines.
Specific precautions for sanding disc size and wire brush usage, including guard requirements.
Warnings regarding dust exposure from construction activities and associated chemicals.
Do not use Type 11 abrasive (cup) wheels with this tool as it is not designed for them.
Explains electronic clutch, constant response, soft start, overload protection, and variable speed features.
Covers lock nut, backing flange, side handle, and hand shield installation procedures.
Instructions for attaching, adjusting, and removing Type 27 and Type 1 wheel guards.
Always position guard between operator and workpiece, directing sparks away.
Detailed steps for installing Type 27 grinding wheels and sanding flap disks using backing flange and lock nut.
Procedure for installing spin-on wheels without using flanges. Ensure wheel is within guard lip.
Steps for installing Type 1 and Type 27 cutting wheels using backing flange, lock nut, and appropriate guard.
Instructions for installing the concrete dust extraction attachment, including guard adjustments and wheel mounting.
Steps for installing the backing pad and sanding disc, including hand shield attachment.
Procedure for installing the wire cup brush onto the spindle, ensuring proper seating against shoulder.
Instructions for rotating the gearbox for improved ergonomics on slide or paddle switch models.
Steps to install the masonry type 1 cutting guard, including dust extraction guard.
Steps for installing a dry diamond wheel using backing flange and lock nut.
Instructions for installing a wire wheel onto the spindle, ensuring proper seating against shoulder.
How to turn the tool on/off and use the lock-on feature with the paddle switch.
How to turn the tool on/off and use the lock-on feature with the slide switch.
Guidance on selecting grinding wheels and performing metal grinding efficiently, including angle and speed.
Instructions for metal cutting, including guard requirements, feed rate, and avoiding side pressure on the disc.
How to cut masonry/concrete, use dust extraction, and handle potential overheating of diamond wheels.
Guidance on concrete surfacing using diamond cup wheels, including dust collection and wheel sharpening.
Information on sanding disc grits, types (open/closed coat), and application examples for wood and metal.
Proper use of wire brushes, emphasizing light pressure to avoid wire breakage and ensure longevity.
Recommendations for professional servicing, emphasis on authorized repair centers and avoiding unauthorized repairs.
Information on tool lubrication, brush examination, and using genuine replacement parts for motor efficiency.
Guidelines for selecting appropriate extension cords based on tool ampere rating and length to prevent voltage drop.
List of included and optional accessories for the power tool.
General