Bosch AHS 48 LI User Manual (English)

Other manuals for Bosch AHS 48 LI

Questions and Answers:

J
Jaime SchultzAug 20, 2025
What to do if the blades are running slow or the anti blocking feature is not functioning on Bosch Brush Cutter?
- C
  Christopher FergusonAug 20, 2025
  If your Bosch Brush Cutter's blades are running slow or the anti-blocking feature isn't working, there are several potential causes: * The battery may not be properly inserted. Ensure it is correctly placed in the battery charger. * The battery contacts might be contaminated. Try cleaning them by inserting and removing the battery several times, or consider replacing the battery. * The battery pack could be defective, requiring a replacement. * The battery might be discharged. Recharge it, referring to the “Battery Charging” section for guidance. * The battery might have been stored outside its recommended temperature range. Allow it to warm naturally to room temperature (within the operating range of 0 – 45 °C).
S
scottgregoryAug 22, 2025
Why my Bosch Brush Cutter does not operate?
- K
  Karen BurgessAug 22, 2025
  If your Bosch Brush Cutter isn't operating, it could be due to a discharged battery. In this case, recharge the battery, consulting the “Battery Charging” section for instructions. Alternatively, the safety switch may not be activated correctly. Refer to the “Initial Operation” section for guidance.
B
Brian RangelAug 25, 2025
Why is the cutting time per battery charge too low on my Bosch Brush Cutter?
- J
  Jonathon ColonAug 25, 2025
  If the cutting time per battery charge is too low on your Bosch Brush Cutter, consider the following: * There might be too much friction due to a lack of lubricant. Apply lubricant spray. * The blade may need cleaning. Clean the blade thoroughly. * The battery may not be fully charged. Recharge the battery, referring to the “Battery Charging” section for instructions.
L
Lauren Rogers MDAug 26, 2025
What to do if the battery charge indicator does not light up properly on my Bosch Brush Cutter?
- G
  gjamesAug 26, 2025
  If the battery charge indicator on your Bosch Brush Cutter does not light up properly, it could be due to the mains plug of the battery charger not being fully plugged in. Ensure that you insert the mains plug completely into the socket outlet. It's also possible that the socket outlet, mains cable, or battery charger is defective. Check the mains voltage and have the battery charger inspected by an authorized after-sales service agent for Bosch power tools.
F
felicia87Aug 28, 2025
Why is the cutting blade hot on my Bosch Brush Cutter?
- D
  David StantonAug 28, 2025
  If the blade on your Bosch Brush Cutter gets hot, it's likely because the cutting blade is blunt. To resolve this, have the blade sharpened.
J
jessica60Aug 29, 2025
Why does my Bosch Brush Cutter operate intermittently?
- M
  Maria DudleyAug 29, 2025
  If the Bosch Brush Cutter operates intermittently, the internal wiring of the garden product may be damaged, or the on/off switch may be defective.
J
Jacob CamposAug 31, 2025
How to fix too much friction on Bosch Brush Cutter?
- S
  Sandra LucasAug 31, 2025
  If you are experiencing too much friction on your Bosch Brush Cutter, apply lubricant spray.
P
perrybrittanySep 2, 2025
Why does the motor run but blades remain stationary on my Bosch Brush Cutter?
- A
  Andrew OconnorSep 2, 2025
  If the motor runs, but the blades remain stationary on your Bosch Brush Cutter, there is an internal fault.
B
Brett BellSep 4, 2025
Why is my Bosch Brush Cutter making excessive vibrations or noise?
- B
  barrettfrancesSep 4, 2025
  If you notice excessive vibrations or noise coming from your Bosch Brush Cutter, the garden product may be defective.
O
Olivia HamiltonSep 6, 2025
What does continuous lighting of the battery charge indicator mean on my Bosch Brush Cutter?
- Z
  Zachary MartinezSep 6, 2025
  No charging procedure is possible for continuous lighting of the battery charge indicator.