Bosch Atino - UK Declaration of Conformity; UK Conformity Regulations and Approved Body

i
Declaration of Conformity
Line Laser
Atino
Article number
3 603 F63 A02
We declare under our sole responsibility that the stated products comply with all applicable
provisions of the regulations listed below and are in conformity with the following standards.
Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North Orbital Road,
Uxbridge UB9 5HJ, United Kingdom
The Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
The Measuring Instruments Regulations 2016
EN 61010-1:2010+A1:2019
EN IEC 61326-1:2021
EN IEC 63000:2018
The UK Approved Body no.8521: LNE‑GMEDUK, SuiteA FirstFloor, EastWing Focus31,
MarkRoad, HemelHempstead, Hertfordshire, HP27BW, UnitedKingdom, has carried out
the testing in accordance with The Measuring Instruments Regulations 2016, ModuleD1 and
issued the following certificate: No.UKCA‑38536 Revision0, dated 2022‑11‑21.
Bosch Power Tools 1 609 92A 7TX | (16.12.2022)