Bosch B20CS50 Series - Temperature control of Magic Cool Zone compartment

27
INPUT CONTROL OBJECT
CONTENTS REMARKS
ON/OFF Temp. of
Freezer & Refrigerator Compartment
Front PCB button
Freezer Set , Refrigerator Set
Super Freeze , Super Cool
Dispenser , Lock
1. How to start
1) Freezer Compartment : Under “Lock” mode, press “Freeze Set” button 5 times while pressing
“Dispenser” button at the same time.
2) Refrigerator Compartment : Under “Lock” mode, press “Refrigerator Set” button 5 times while
pressing “Dispenser” button at the same time.
3) Initial setting
Freezer Compartment
( 00 )
Refrigerator Compartment
( 00 )
2. In case change of “Freezer Compartment” ON/OFF temperature
0 ~ +2
℃
0 ~ -2
℃
Range of Temp. Change
“Temp. Change” = “Setting Value” × “0.072℃”
"00" ~ "+30""00" ~ "-30"Range of setting Value
Super FreezeFreezer Setbutton
up(+)down(-)ON/OFF temp.
3. In case change of “Refrigerator Compartment” ON/OFF temperature
0 ~ +3
℃
0 ~ -3
℃
Range of Temp. Change
“Temp. Change” = “Setting Value” × “0.1℃”
"00" ~ "+30""00" ~ "-30"Range of setting Value
Super CoolRefrigerator Setbutton
up(+)down(-)ON/OFF temp.
※ If 10 days passes from initial power on,
the “setting value” is memorized in the EEPROM automatically.
※ In order to clear this “setting value” ,
it is needs “EEPROM clear” ( “Dispenser” + “Water Filter Reset” 5 times)
4-15. Compensation of F/R-Compartment temperature.