Odors en-us
29
Telescopic rails
Removing telescopic rails
1. Pull out telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear pin.
4. Push telescopic rail together, push backwards
above the rear pin, and disengage.
Installing telescopic rails
1. Place the extended telescopic rail on the front
pin.
2. Pull the telescopic rail forwards slightly until it
engages.
3. Insert telescopic rail on the rear pin.
4. Push lock backwards.
lOdors
Odor s
If you notice any unpleasant odors:
1. Switch off the appliance with the ÿ power button.
2. Take all food out of the appliance and look for
spoiled food or any spillage.
3. Clean the inside.~ "Cleaning" on page 28
4. Seal strong-smelling food.
5. Switch the appliance on again.
6. Arrange food in the appliance.
7. After 24 hours, check whether odors are building
up again.
9Lighting
Li ght i ng
Your appliance features a maintenance-free LED
light.
Only customer service or authorized technicians may
repair the light.
>Noises
No i s e s
Normal noises
Droning: A motor is running, e.g. refrigerating unit,
fan, water valve is activated.
Bubbling, buzzing or gurgling: Refrigerant is
flowing through the tubes.
Clicking: Motor, switch, solenoid valves or water
valve are switching on or off.
Cracking: Automatic defrosting is running.
Clattering sound: Ice cubes from the ice maker are
falling into the ice cube bin.
Preventing noises
Appliance is not level: Align appliance.
~ "Aligning the appliance" on page 7
The appliance is not "free-standing": Make sure
the appliance is not touching other surfaces and the
minimum clearances are observed.
~ "Minimum clearances" on page 6
Bins, shelves or storage compartments wobble or
stick: Check the removable equipment and re-insert
if required.
Bottles or containers are touching each other:
Move bottles or containers away from each other.
4
4
To Next Page
Loading...
Need help?
General
