Bosch BFL623MB3 - Childproof Lock; Basic Settings

en Childproof lock
12
Programme Food Cookware Weight range
inkg
Information
P06 Potatoes With lid 0.15–1.00 ¡ For boiled potatoes, cut fresh potatoes into small,
equally sized pieces.
¡ Add one tablespoon of water and a little salt for every
100g boiled potatoes.
P07 Vegetables With lid 0.15–1.00 ¡ Weigh fresh, washed vegetables scales.
¡ Cut the vegetables into small, uniform pieces.
¡ Add one tablespoon of water for every 100g boiled
potatoes.
Cooking food with the automatic programmes
1.
Weigh the food.
You require the weight in order to set the pro-
gramme.
2.
Place the food on microwave-safe cookware and
cover with a lid.
3.
Add the volume of water in accordance with the
manufacturer's instructions on the packaging.
4.
Set the programme. →Page11
5.
Once the programme has finished, stir the food
again.
6.
The food should be left to stand for an additional 5
to 10minutes until it reaches a uniform temperature.
The cooking results are dependent on the food
quality and consistency of the food.
Childproof lock
9 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
9.1 Activating the childproof lock
Requirement:The appliance is switched off.
▶
Press and hold for approx. four seconds.
a The control panel is locked.
a appears in the display.
9.2 Deactivating the childproof lock
▶
Press and hold for approx. 4 seconds.
a The control panel is unlocked.
Basic settings
10 Basic settings
You can configure the basic settings for your appliance to meet your needs.
10.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Indicator Basic setting Selection Description
Button tone = off
= on
1
Switching the button tones on or off
Note:You cannot switch off the button tone for and
⁠.
Demo mode = off
1
= on
The appliance is switched off. You can use the buttons
and the display. The buttons have no function, meaning
that no power arises for the microwave, for example.
Dealers predominantly use the demo mode.
While the demo mode is activated, the display shows ⁠.
1
Factory setting (may vary according to model)
10.2 Changing basic settings
Requirement:The appliance is switched off.
1.
Press and hold and for a few seconds.
a The display shows for the first basic setting.
2.
To edit the basic setting, press ⁠.
a The selected setting lights up in the display.
3.
Use the rotary selector to set the required selection.
4.
To accept the basic setting, press ⁠.
5.
To exit the basic setting, press ⁠.
6.
Use the rotary selector to change to the basic set-
ting ⁠.
7.
To edit the basic setting, press ⁠.
a The selected setting lights up in the display.
8.
Use the rotary selector to set the required selection.
9.
To accept the basic setting, press ⁠.