Do you have a question about the Bosch BMS500-AAU036-1AHCXC and is the answer not in the manual?
Brand | Bosch |
---|---|
Model | BMS500-AAU036-1AHCXC |
Category | Air Conditioner |
Language | English |
Details essential safety warnings and precautions before installation and operation.
Details the delay time for compressor restarts after shutdown.
Explains how compressor discharge temperature affects operation and protection.
Describes the protection triggered by abnormal outdoor fan speeds.
Details protection features for the inverter module against faults.
Explains the low voltage protection mechanism and its behavior.
Describes how compressor current limits are adjusted based on temperature.
Details the protection triggered by loss of communication between units.
Explains protection related to high condenser coil temperatures.
Warning regarding electrical hazards, especially capacitors, during troubleshooting.
Lists and explains various error codes (EC, EL, PC) for the outdoor unit.
Provides a table linking error codes to potential causes for quick diagnosis.
Troubleshooting steps for EEPROM communication errors between PCB chips.
Diagnostic flow for errors related to communication between indoor and outdoor units.
Troubleshooting for communication malfunctions between IPM and main control boards.
Diagnosing issues with temperature sensors (T2B, T3, T4, T5) and connections.
Troubleshooting steps for voltage protection errors related to power supply and IPM.
Diagnostic procedure for PFC module protection errors and related components.
Troubleshooting for issues with outdoor DC fan motor speed control.
Diagnostic steps for high pressure protection errors and related causes.
Troubleshooting guide for low pressure protection errors and system checks.
Diagnosing problems related to current overload, zero speed, and compressor speed.
Troubleshooting steps for compressor discharge temperature protection errors.
Diagnostic procedure for high condenser temperature protection.
Troubleshooting for inverter module malfunctions affecting compressor drive.
Diagnostic steps for high temperature protection errors on the compressor top.
Troubleshooting for lack of phase failure in the outdoor DC fan motor.