Bosch Buderus Control 8000 Series - Page 20

User Documentation
20|33
© All rights with Robert Bosch GmbH, also for the case of protected rights applications
EN_User_documentation_Instructions_for_controlling_the_Logamatic_5000_controller_series_via_Modbus_TCP_I
P_20210203.docx | 10.02.2021
You want to retrieve the address "Input Register 34 - HMI State" from substation 8
via the master using Slave12:
 
󰇛
  
󰇜
     
 
󰇛
  
󰇜
   


       
      
You can access the HMI State of slave station 8 of segment slave station 12 via the
head-end station using the address "Input Register 21534".