To Next PageTo Next Page
Need help?Do you have a question about the Bosch CL200 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | CL200 |
| Category | Controller |
| Language | English |
Presents instructions for standard operation of described products and compliance with safety standards.
Details requirements for personnel trained in automation technology and PLC controllers.
Explains common safety symbols like High Voltage, Corrosive Acid, ESD, and grounding.
Covers hazards like Emergency-STOP, testing programs, retrofits, and handling ESD sensitive devices.
Details protective measures for handling electrostatically sensitive devices (ESD) to prevent damage.
Provides technical specifications for the CL200 controller, including compliance and operating conditions.
Details the functions of the NT200 power supply module for internal voltages and monitoring.
Lists detailed technical specifications for the NT200 power supply module, including current draw and battery details.
Provides a comparative overview of specifications and order numbers for all CL200 CPU variants.
Lists detailed specifications for 16-way and 32-way E 24 V– digital input modules.
Lists comparative specifications for A 24 V– (0.5A/2A) and AR/2A output modules.
Lists detailed specifications and order numbers for Digital Input/Output modules.
Lists specifications for the DP-EA4 module, including inputs, outputs, power, and interfaces.
Lists specifications for the AG/S expansion module, including current draw, insulation test, and cable length.
Lists specifications for R200, R200P, and COM2-E modules, including interfaces, baud rates, and current draw.
Lists specifications for A ana, A10 ana, and A20 ana modules, including voltage/current ranges and current draw.
Lists specifications for POS-LR1/LR2 and POS-SA1/SA2 modules, including channels, encoder systems, and current draw.
Lists specifications for the BM2-ASI bus master, including bus stations, I/O, cycle time, and current draw.
Introduces the RM2-DP12 module for configuring a modular slave station on PROFIBUS-DP with CL200.
Lists specifications for the RM2-DP12 module, including power supply, current draw, and insulation test.
Outlines requirements for the 24 V power supply, including protective separation and cable routing.
