Need help?Do you have a question about the Bosch CR 10 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | CR 10 |
| Category | Controller |
| Language | English |
Safety regulations, standards, and contractor requirements for installation.
Information on preventing frost damage and conditions for reliable frost protection.
Lists various uses like room temperature control and zone control.
Details general usage scenarios and compatibility with other systems.
Lists the items included with the user interface.
Lists dimensions, voltage, current, BUS interface, and operating ranges.
Information on energy efficiency classification per EU regulation.
Explains how the CR 10 controls heat source based on room temperature.
Describes using the CR 10 with zone modules for multiple heating circuits.
Explains using the CR 10 as a remote interface for a higher-level system.
Identifies the main display and the selector dial/button.
Explains how to interpret various displays like current temp, required temp, and faults.
Guides users on setting the desired room temperature using the selector.
Details how to turn off the heating system using the device.
Guides for mounting the unit and connecting its power and bus cables.
Steps for initial setup and system integration.
Details on configurable parameters and their adjustment ranges.
Instructions for noting down fault codes and contacting support.
Lists common fault codes, their causes, and contractor assistance.
Information on environmentally compatible disposal of the device according to directives.
To Next Page