Bosch CR 10 - Use; Scope of Delivery; Technical Specifications; Product Data on Energy Consumption

Product Description | 3
6720830560 (2015/06)
CR10
• Remote control in systems with higher-level user interface (e.g. CW 400 with
max. 4 heating circuits or CW 800 with max. 8 heating circuits), can be used
solely as a remote control in conjunction with heat sources with an external
cylinder primary pump
Use
• Heat source with 2-wire BUS system, EMS 2 or OpenTherm
• Combination with timers (e.g. MT10, ...) is possible
• Combination with TR..., TA..., FR... and FW... is not possible.
Scope of delivery
• User interface
• Technical documentation
Technical specifications
Product data on energy consumption
The following product data complies with the requirements of EU Regulation 811/
2013 as a supplement to Directive 2010/30/EU. The class of temperature controller
is required to calculate the central heating energy efficiency of an integrated system,
and it is therefore incorporated into the system data sheet.
Dimensions (W × H × D) 82 x 82 x 23 mm
Rated voltage 10 ... 24 V DC
Rated current 4 mA
BUS interface EMS 2 (2-wire BUS, OpenTherm)
Control range 5 ... 30 °C
Permitted ambient temperature 0 ... 60 °C
Protection class III
IP rating IP20