To Next PageTo Next Page
Need help?Do you have a question about the Bosch Calais USB40 and is the answer not in the manual?
General| Category | Car Receiver |
|---|---|
| Model | Calais USB40 |
| Brand | Bosch |
| USB Port | Yes |
| Audio Formats | MP3, WMA |
| Display Type | LCD |
| Power Output | 4 x 40W |
| Tuner Bands | FM/AM |
Controls device power and muting.
Switches between audio sources and radio bands.
Device for commercial vehicles with specific voltage.
Prioritize safe operation and adjust volume for sirens.
Four-digit code prevents unauthorized use.
How to activate or deactivate the code entry prompt.
Procedure to enter code after voltage loss.
Use the dedicated button for power control.
Device operates in sync with vehicle ignition.
Increase/decrease system volume using the control.
Automatically adjust volume based on vehicle speed.
Modify high and low frequency audio levels.
Adjust audio balance between left/right and front/rear speakers.
Restore factory default tone settings.
Adjust the device's internal clock.
Configure a single alarm event.
Features of the RDS FM radio receiver.
Enable or disable traffic announcement priority.
Playable CD types and drive protection.
Insert and begin playback of a CD.
Play MP3/WMA files from CDs and USB devices.
Guidelines for creating playable MP3 CDs/USBs.
Specific advice for burning MP3 CDs.
Requirements for USB drives for playback.
Connect and select a USB device for playback.
Detailed functions for buttons on the remote control.
Specifies voltage requirements for different models.
Details on output power and preamp specs.
Pin assignment for power supply and preamplifier.
